Ads
related to: power cord for dryer outlet cover 3 holes in plug replacement guide
Search results
Results From The WOW.Com Content Network
The 20 A plug has a blade rotated 90° (opposite blade from what would be the "line" blade on a 2-15 or 5-15 plug. This prevents accidental insertion of plugs into outlets that use different voltages), and the 6-20R receptacle has a T-shaped hole to accept both 6-15P and 6-20P plugs (similar to the 5-20R receptacle accepting 5-15P and 5-20P plugs).
Like in most European plugs, the power pins of Danish plugs are 19 mm (0.75 in) long and spaced 19 mm (0.75 in) apart, with a diameter of 4.8 mm (0.19 in). The earthing pin is part of the plug (in contrast to French and Schuko plugs); it is D-shaped, 14 mm (0.55 in) long, and offset from the power pins by 13 mm (0.51 in).
Power cord, with plug at end, plugged into a Japanese outlet with ground post, for a washing machine. North American power cord with IEC 60320 C13 appliance connector and NEMA 5-15 wall plug. A power cord , line cord , or mains cable is an electrical cable that temporarily connects an appliance to the mains electricity supply via a wall socket ...
Three-prong plugs do not fit into the older, two-prong receptacles. [7] When used as intended, the ground pin of the 3-wire receptacle is to be connected to a grounded cover screw, or to an external ground. In 1969, Underwriters Laboratories mandated three-prong plugs on major appliances for safety. [7]
The type 15 plug and socket has 3 round pins of 4 mm diameter, plus 2 flat pins (for L2 and L3). It is designed for three phase applications and is rated at 10 A, 250 V/440 V. The socket will also accept types 11 and 12 plugs, and the Europlug. The type 25 plug and socket has 3 rectangular pins, 4 mm x 5 mm, plus 2 flat pins (for L2 and L3).
AC power plugs are also commonly circular, for example, Schuko plugs and IEC 60309. NMEA 2000 cabling using M12 connectors. The M12 connector, specified in IEC 61076-2-101, is a circular electrical plug/receptacle pair with 12mm OD mating threads, used in NMEA 2000, DeviceNet, IO-Link, some kinds of Industrial Ethernet, etc. [16] [17]