Search results
Results From The WOW.Com Content Network
For example, if the propelling nozzle were to be removed to convert a turbojet into a turboshaft, the role played by the nozzle area is now taken by the area of the power turbine nozzle guide vanes or stators. [18]
Some enters the liner at the left where the fuel nozzle is located. The remaining air passes along the outside of the liner and enters the holes downstream of the primary zone to complete the combustion and dilute combustion products to a temperature acceptable to the turbine first stage nozzle guide vanes visible at the right.
Turbine inlet guide vanes of a turbojet. Velocity triangles can be used to calculate the basic performance of a turbine stage. Gas exits the stationary turbine nozzle guide vanes at absolute velocity V a1. The rotor rotates at velocity U. Relative to the rotor, the velocity of the gas as it impinges on the rotor entrance is V r1.
In a gas turbine engine, a single turbine stage is made up of a rotating disk that holds many turbine blades and a stationary ring of nozzle guide vanes in front of the blades. The turbine is connected to a compressor using a shaft (the complete rotating assembly sometimes called a "spool").
Diagram of a typical gas turbine jet engine Frank Whittle Hans von Ohain. The turbojet is an airbreathing jet engine which is typically used in aircraft. It consists of a gas turbine with a propelling nozzle. The gas turbine has an air inlet which includes inlet guide vanes, a compressor, a combustion chamber, and a turbine (that drives the ...
An axial turbine has a similar construction as an axial compressor, but it operates in the reverse, converting flow of the fluid into rotating mechanical energy. A set of static guide vanes or nozzle vanes accelerates and adds swirl to the fluid and directs it to the next row of turbine blades mounted on a turbine rotor.
A turbine stage turns the gas from an axial direction and speeds it up (in the nozzle guide vanes) to turn the rotor most effectively ( rotor blades must produce high lift), the proviso being that this is done efficiently, ie with acceptable losses. [70]
In the reaction turbine, the rotor blades themselves are arranged to form convergent nozzles. This type of turbine makes use of the reaction force produced as the steam accelerates through the nozzles formed by the stator. Steam is directed onto the rotor by the fixed vanes of the stator. It leaves the stator as a jet that fills the entire ...