Ads
related to: when to replace transmission oil
Search results
Results From The WOW.Com Content Network
Automatic transmission fluid (ATF) is a hydraulic fluid that is essential for the proper functioning of vehicles equipped with automatic transmissions. Usually, it is coloured red or green to differentiate it from motor oil and other fluids in the vehicle.
Gear oil is a lubricant made specifically for transmissions, transfer cases, ... Some modern automatic transaxles (integrated transmission and differential) ...
When performing a fluid change some of the old oil will not drain out. NOTE: 5W30 engine oil does not contain additives for use in manual transmissions. Additives in standard gear and axle lubes will etch the bronze synchronizers and 80W oil will not properly flow into the NV3500 bearings.
Power steering fluid is a sub type of hydraulic fluid. Most are mineral oil or silicone based fluids, while some use automatic transmission fluid, made from synthetic base oil. [8] [9] Automatic transmissions use fluids for their lubrication, cooling and hydraulic properties for viscous couplings.
Roto's disadvantage was the 2-3 range or 1-2 gear change because it is not only a huge ratio jump from 2-3 range or 1-2 shift from 2.93 to 1.56, but also there is no fluid slippage in the coupling because the coupling drains (four-tenths of a second) to engage or apply the front clutch and so the trans goes to full mechanical connection.
The police package (9C1) B-body cars featured a First Gear Block Out (FGBO) Plate on the transmission housing to prevent drivetrain damage. The shift point for first to second gear is about 43 MPH (69 km/h) while second to third gear shift point is about 83 MPH (134 km/h) assuming a 3.08:1 differential and a 5,500 RPM engine speed limit.