Search results
Results From The WOW.Com Content Network
A display device is the most common form of output device which presents output visually on computer screen. The output appears temporarily on the screen and can easily be altered or erased. With all-in-one PCs, notebook computers, hand held PCs and other devices; the term display screen is used for the display device.
العربية; বাংলা; 閩南語 / Bân-lâm-gú; Башҡортса; Беларуская (тарашкевіца) Български; Bosanski
Many power supplies create their 3.3 V output by down-regulating their 5 V rail, or create 5 V output by down-regulating their 12 V rails. The two rails involved are labeled on the power supply with a combined current limit. For example, the 5 V and 3.3 V rails are rated with a combined total current limit.
Before the mid-2000s, most monitors used a cathode-ray tube (CRT) as the image output technology. [1] A monitor is typically connected to its host computer via DisplayPort, HDMI, USB-C, DVI, or VGA. Monitors sometimes use other proprietary connectors and signals to connect to a computer, which is less common.
A single-board computer (SBC) is a complete computer built on a single circuit board, with microprocessor(s), memory, input/output (I/O) and other features required of a functional computer. Single-board computers are commonly made as demonstration or development systems, for educational systems, or for use as embedded computer controllers .
The term can also be used as part of an action; to "perform I/O" is to perform an input or output operation. I/O devices are the pieces of hardware used by a human (or other system) to communicate with a computer. For instance, a keyboard or computer mouse is an input device for a computer, while monitors and printers are output devices.
For the composite output, these four-bit color numbers are encoded by the CGA's onboard hardware into an NTSC-compatible signal fed to the card's RCA output jack. For cost reasons, this is not done using an RGB -to- YIQ converter as called for by the NTSC standard, but by a series of flip-flops and delay lines.
This calculating device was fully electronic – control, calculations and output (the first electronic display). [89] John Vincent Atanasoff and Clifford E. Berry of Iowa State University developed the Atanasoff–Berry Computer (ABC) in 1942, [90] the first binary electronic digital calculating device. [91]