Search results
Results From The WOW.Com Content Network
Float glass is a sheet of glass made by floating molten glass on a bed of molten metal of a low melting point, typically tin, [1] although lead was used for the process in the past. [2] This method gives the sheet uniform thickness and a very flat surface. [ 3 ]
Most float glass is soda–lime glass, but relatively minor quantities of special borosilicate [10] and flat panel display glass are also produced using the float glass process. [11] The float glass process is also known as the Pilkington process, [12] named after the British glass manufacturer Pilkington, who pioneered the technique (invented ...
The Fourcault process is a method of manufacturing plate glass. First developed in Belgium by Émile Fourcault [ fr ] (1862–1919) during the early 1900s, the process was used globally. Fourcault is an example of a "vertical draw" process, in that the glass is drawn against gravity in an upward direction. [ 1 ]
In hollow glass production (hollow glass), the glass machine below is fed with glass gobs. In flat glass production (float glass), the glass is fed at special wide outlets as a glass ribbon over a so-called float bath of liquid tin (for flat glass without structure : e.g. window glass, car glass) or for flat glass with structure over a profiled ...
The breakthrough in large, mass-produced, continuous glass production happened in the 1950s with the development of the Float glass manufacturing process. Molten glass is poured over a surface of molten tin, where it flattens out and can be drawn off in a ribbon. The advantage of this process is that it is scalable to any size and produces high ...
Most float glass is soda–lime glass, but relatively minor quantities of specialty borosilicate [64] and flat panel display glass are also produced using the float glass process. The success of this process lay in the careful balance of the volume of glass fed onto the bath, where it was flattened by its own weight. [65] Full scale profitable ...
To prevent such material weaknesses, objects made from molten glass are annealed by gradual cooling in a lehr oven, from the annealing point, a temperature just below the solidification temperature of the glass. [1] In the process of annealing glass, the temperature is first equalised by holding or "soaking" the glass at the annealing point for ...
This glass is dimensionally inaccurate and often created visual distortions. These rough panes were ground flat and then polished clear. This was a fairly expensive process. Before the float process, mirrors were plate glass as sheet glass had visual distortions that were akin to those seen in amusement park or funfair mirrors.