When.com Web Search

  1. Ads

    related to: tire weight specs calculator

Search results

  1. Results From The WOW.Com Content Network
  2. Tire code - Wikipedia

    en.wikipedia.org/wiki/Tire_code

    Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [24] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.

  3. Wheel sizing - Wikipedia

    en.wikipedia.org/wiki/Wheel_sizing

    Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.

  4. Tire uniformity - Wikipedia

    en.wikipedia.org/wiki/Tire_uniformity

    Tire forces are divided into three axes: radial, lateral, and tangential (or fore-aft). The radial axis runs from the tire center toward the tread, and is the vertical axis running from the roadway through the tire center toward the vehicle. This axis supports the vehicle's weight. The lateral axis runs sideways across the tread.

  5. Federal Bridge Gross Weight Formula - Wikipedia

    en.wikipedia.org/wiki/Federal_Bridge_Gross...

    CMVs are restricted by gross weight (total weight of vehicle and cargo), and by axle weight (i.e., the weight carried by each tire). The federal weight limits for CMVs are 80,000 pounds (36,000 kg) for gross weight (unless the bridge formula dictates a lower limit), 34,000 pounds (15,000 kg) for a tandem axle, and 20,000 pounds (9,100 kg) for a ...

  6. Tire balance - Wikipedia

    en.wikipedia.org/wiki/Tire_balance

    If the tire is not checked, it has the potential to cause vibration in the suspension of the vehicle on which it is mounted. In tire retail shops, tire/wheel assemblies are checked on a spin-balancer, which determines the amount and angle of unbalance. Balance weights are then fitted to the outer and inner flanges of the wheel. [2]

  7. European Tyre and Rim Technical Organisation - Wikipedia

    en.wikipedia.org/wiki/European_Tyre_and_Rim...

    The European Tyre and Rim Technical Organisation (ETRTO) exists to specify and harmonise sizes of rims and their associated pneumatic tyres across the European Union.ETRTO sizes apply to rims and tyres for vehicles of all types, including bicycles.