Ads
related to: deadbolt schlage replacement keys by code 2 pack instructions video
Search results
Results From The WOW.Com Content Network
The bitting code is used in conjunction with a key's Depth and Spacing Number to completely determine all relevant information regarding the key's geometry. [1] Each number in the bitting code corresponds to a cut on the key blade. For example, a bitting code of 11111 with Depth and Spacing Number 46 specifies a Kwikset key with five shallow cuts.
There were 32 positions for possible hole locations, giving approximately 4.3 billion different keys. The key could easily be changed for each new guest by inserting a new key template in the lock that matched the new key. [2] In the early 1980s, the key card lock was electrified with LEDs that detected the holes. A keycard with a magnetic stripe
A bit key with its main parts labelled. Bitting is the depth of key cuts on a cylinder key for a pin tumbler lock, often expressed as a number. Bitting also refers to the combination of key cuts on a bit key for a warded lock or lever tumbler lock. The exact geometry of modern keys is usually described by a code system. [1]
Schlage (/ ʃ l eɪ ɡ / SHLAYG) [1] [2] is an American lock manufacturer founded in 1920 by Walter Schlage. Schlage was headquartered in San Francisco from its inception until it relocated to Colorado Springs, Colorado, in 1997. Schlage also produces high-security key and cylinder lines Primus, Everest, and Everest Primus XP.
The term "warded lock" refers to the lock mechanism, while the term "mortise lock" refers to the bolt location. Warded locks contain a series of static obstructions, or wards, within the lock box; only a key with cutouts to match the obstructions will be able to turn freely in the lock and open the latch. [4]
A deadbolt or deadlock is a type of lock morticed into a wooden door where a bolt is thrown into the door frame, using a key from either side, to secure the door. [ 1 ] It is distinct from a spring bolt lock because a deadbolt can only be opened by a key or handle.
At the time, Schlage was a citizen of Germany residing in Berkeley, California. [2] In 1919, Schlage patented a door knob which, when pushed up, locked the door. [3] [4] This was succeeded by a door knob incorporating a push-button lock, patented in 1924. [5] By then, Schlage had moved to San Francisco. [6]
Key cutting is the primary method of key duplication: a flat key is fitted into a vise in a machine, with a blank attached to a parallel vise, and the original key is moved along a guide, while the blank is moved against a blade, which cuts it.