Ads
related to: yankee screwdriver size chart
Search results
Results From The WOW.Com Content Network
The trade name "Yankee" screwdriver was first marketed by North Brothers Manufacturing Company in ≈16 April 1895, with the No. ≠130 spiral ratchet screwdriver. Yankee soon became and still is a well-known name in automatic spiral ratchet screwdrivers , with several other models, and model improvements patented by North Bros. over a 40-year ...
In Japan, the male sizes are often designated as DTC-20, DTC-27, DTC-40 (discontinued) and DTC-45 corresponding to a respective screw head size of 3.2 mm, 4.6 mm, 6.4 mm and 7.7 mm; with the size of the screw measured across the widest portion of the mating part of the head. The most common sizes in use for consumer electronics are DTC-20 and ...
Eventually the success of the Yankee line of tools led the Stanley Works tool company to acquire the North Bros. in 1946, chiefly to improve their own product lines. Stanley was primarily interested in their bit and brace designs, which continued to be produced unchanged at Stanley for decades, and the spiral ratchet "Yankee" screwdrivers. The ...
Proper use requires that the screwdriver's tip engage the head of a screw of the same size and type designation as the screwdriver tip. Screwdriver tips are available in a wide variety of types and sizes (List of screw drives). The two most common are the simple 'blade'-type for slotted screws, and Phillips, generically called "cross-recess ...
Example (inch, coarse): For size 7 ⁄ 16 (this is the diameter of the intended screw in fraction form)-14 (this is the number of threads per inch; 14 is considered coarse), 0.437 in × 0.85 = 0.371 in. Therefore, a size 7 ⁄ 16 screw (7 ⁄ 16 ≈ 0.437) with 14 threads per inch (coarse) needs a tap drill with a diameter of about 0.371 inches.
Machine screws with different thread diameters Hex key set with metric sizes from 2 mm to 10 mm according to sizes for use with ISO 262 screw sizes (except 3.5 mm for M6 internal set screw) For each size bolt or screw and type of head, there is a corresponding size driver prescribed by various ISO standards, including: Internal hex drive: ISO ...