Search results
Results From The WOW.Com Content Network
Since this is a measurement of mass, any conversion to barrels of oil equivalent depends on the density of the oil in question, as well as the energy content. Typically 1 tonne of oil has a volume of 1.08 to 1.19 cubic metres (6.8 to 7.5 bbl).
US barrel: USbbl US bbl 31½ US gal used for liquids except for oil and beer (see the full list) 1.0 US bbl (120 L; 32 US gal; 26 imp gal) U.S.bbl U.S. bbl barrel: oilbbl bbl 42 US gal 1.0 bbl (0.16 m 3) US beer barrel: USbeerbbl (usbeerbbl) US bbl 1.0 US bbl (120 L; 31 US gal; 26 imp gal) U.S.beerbbl (usbeerbbl) U.S. bbl US gallon: USgal
Both the 42-US-gallon (159 L) barrels (based on the old English wine measure), the tierce (159 litres) and the 40-US-gallon (150 L) whiskey barrels were used. Also, 45-US-gallon (170 L) barrels were in common use. The 40 gallon whiskey barrel was the most common size used by early oil producers, since they were readily available at the time.
In 1824, these units were replaced with a single system based on the imperial gallon. [a] Originally defined as the volume of 10 pounds (4.54 kg) of distilled water (under certain conditions), [b] then redefined by the Weights and Measures Act 1985 to be exactly 4.546 09 L (277.4 cu in), the imperial gallon is close in size to the old ale gallon.
= 8 imperial gallons = 4 imperial pecks = 36.368 72 litres: ≈ 8.25645 US dry gallons ≈ 9.60760 US fluid gallons ≈ 2 219.36 cubic inches: ≈ 1.284 35 cubic feet 1 US bushel [6] = 8 US dry gallons = 4 US pecks = 2 150.42 cubic inches = 1.244 46 cubic feet = 35.239 070 166 88 litres ≈ 9.3092 US fluid gallons ≈ 7.7515 imperial gallons
This volume of natural gas has the same energy content as one US gallon of gasoline (based on lower heating values: 900 BTU/cu ft (9.3 kWh/m 3) of natural gas and 114,000 BTU/US gal (8.8 kWh/L) for gasoline). [22] One GGE of CNG pressurized at 2,400 psi (17 MPa) is 0.77 cubic feet (22 litres; 5.8 US gallons).
Conversions between units in the metric system are defined by their prefixes (for example, 1 kilogram = 1000 grams, 1 milligram = 0.001 grams) and are thus not listed in this article. Exceptions are made if the unit is commonly known by another name (for example, 1 micron = 10 −6 metre).
In the oil industry, mud weight is the density of the drilling fluid and is normally measured in pounds per gallon (lb/gal) (ppg) or pound cubic feet (pcf) . [1] In the field it is measured using a mud scale or mud balance. Mud can weigh up to 22 or 23 ppg. A gallon of water typically weighs 8.33 pounds (or 7.48 ppg).