Ad
related to: difference between aac and sbc trucks diesel fuel
Search results
Results From The WOW.Com Content Network
In 1964, horsepower increased to 366 hp (273 kW) for the newly named L-76 version, and 375 hp (280 kW) for the fuel injected L-84, making the L-84 the most powerful naturally aspirated, single-cam, production small-block V8 until the appearance of the 385 hp (287 kW), 395 lb⋅ft (536 N⋅m) Generation III LS6 in 2001. This block is one of ...
A dish of ethanol aflame. Various alcohols are used as fuel for internal combustion engines.The first four aliphatic alcohols (methanol, ethanol, propanol, and butanol) are of interest as fuels because they can be synthesized chemically or biologically, and they have characteristics which allow them to be used in internal combustion engines.
The Chevrolet small-block engine refers to one of the several gasoline-powered vehicle engines manufactured by General Motors. These include: The first or second generation of non-LS Chevrolet small-block engines; The third, fourth, or fifth generation of LS-based GM engines; The Chevrolet Gemini small-block engine
The LB1 used in trucks and vans was referred to as Vortec in Chevrolet literature (named after a combustion chamber design known as a swirl port which twists the fuel mix from the intake ports as introduced with the Cavalier's 2.0L engine), and this name continued to be used with all truck and van 4.3 L (262 cu in) V6s until 2014.
The Series 92 engines were introduced in 1974. [8] Compared to the Series 71 engines they were derived from, the Series 92 featured a larger bore of 4.84025 ± 0.00125 in (122.942 ± 0.032 mm) and an identical stroke of 5 in (130 mm) for a nominal displacement per cylinder of 92 cu in (1,510 cc), from which the Series 92 derives its name.
A tank of diesel fuel on a truck. Diesel fuel, also called diesel oil, heavy oil (historically) or simply diesel, is any liquid fuel specifically designed for use in a diesel engine, a type of internal combustion engine in which fuel ignition takes place without a spark as a result of compression of the inlet air and then injection of fuel.
The fuel is now injected into the cylinder and the fuel ' burn' or expansion is started at this point by the high temperature of the, now compressed, air. As the fuel burns it expands exerting pressure on the piston, which in turn develops torque at the crankshaft. It can be seen that the diesel engine is operating at constant pressure.
Side mounting is the most common placement of diesel tanks for trucks. This is typically accomplished with the use of brackets, straps or a combination of both for the purpose of attaching the fuel tank to the truck frame. The choice of shape is generally influenced by the need for maximum fuel capacity and the desire for a stylish look.