Search results
Results From The WOW.Com Content Network
The ZF S6-650 is a 6-speed manual transmission manufactured by ZF Friedrichshafen AG. It is designed for longitudinal engine applications, and is rated to handle up to 705 newton-metres (520 lbf⋅ft) of torque. General Motors used the S6 as RPO ML6. Gear ratios:
Basically there are two types of motor vehicle transmissions: Manual – the driver has to perform each gear change using a manually operated clutch; Automatic – once placed in drive (or any other 'automatic' selector position), it automatically selects the gear ratio dependent on engine speed and load
Yamaha replaced the Grizzly 600 with the new Grizzly 660 using a larger engine that is 660cc derived from the Raptor 660 with a five-valve cylinder head. Beyond the engine, the biggest differences between the Grizzly 600 (offered in the US from 1998 to 2001) and the Grizzly 660 (introduced in 2002), is the rear suspension.
Gear shift lever on a motorcycle (above the toe of the rider's boot) A sequential manual transmission is unsynchronized, and allows the driver to select either the next gear (e.g. shifting from first gear to second gear) or the previous gear (e.g., shifting from third gear to second gear), operated either via electronic paddle-shifters mounted behind the steering wheel or with a sequential ...
It is a double overdrive transmission. The TR-6060 is manufactured by TREMEC (formerly Transmission Technologies Corporation) and is rated for 430 lb⋅ft (580 N⋅m) to 650 lb⋅ft (880 N⋅m) of torque, depending on gearing. [1] TREMEC sells the TR-6060 as the "Magnum" for aftermarket applications.
(Getrag 5mt transmission) 5 speed (1st generation kia Sportage) 217 — 6-speed BMW 1 Series, BMW 3 Series, BMW 5 Series, BMW Z4, Alfa Romeo Giulia (952) 220 — 5-speed BMW 1 Series 221 — 5-speed Jaguar S-Type, Lincoln LS 226 — 6-speed BMW M3 Maserati 3200 GT [6] 226 AMT — 6-speed automated manual BMW M3 232 — 4-speed 1968–1972 BMW ...
An automatic transmission with a manumatic function provides a greater level of control by allowing the driver to request an upshift or downshift at a specific time. This is usually achieved using "+" and "-" positions on the gear selector or with paddle-shifters mounted beside the steering wheel.
The 8HP 70 transmission with the gearset 4 in 23-85-teeth-configuration was the pilot series and therefore without generation designation. It was first used in the BMW 7 Series (F01) 760Li, has a torque handling limit of 700 N⋅m (516 lb⋅ft), and weighs 87 kg (192 lb).