Ads
related to: filling gaps in old wood floors
Search results
Results From The WOW.Com Content Network
A shim is a thin and often tapered or wedged piece of material, used to fill small gaps or spaces between objects. [1] Shims are typically used in order to support, adjust for better fit, or provide a level surface. Shims may also be used as spacers to fill gaps between parts subject to wear.
Brick nog (nogging or nogged, [1] beam filling) is a construction technique in which bricks are used to fill the gaps in a wooden frame. Such walls may then be covered with tile , weatherboards, or rendering , or the brick may remain exposed on the interior or exterior of the building.
Epoxy resin, usually as a two-part mix system, cures under a wider range of temperatures and moisture content than other glues, does not require pressure while curing, and has good gap-filling properties: near-perfect joints with very small gaps actually produce weaker bonds. Use of epoxy requires careful attention to the mixing ratio of the ...
Oakum is a preparation of tarred fibers used to seal gaps. Its traditional application was in shipbuilding for caulking or packing the joints of timbers in wooden vessels and the deck planking of iron and steel ships. [1] Oakum was also used in plumbing for sealing joints in cast iron pipe, and in log cabins for chinking. In shipbuilding it was ...
Building a palisade wall for the fort at Jamestown, Virginia The Golden Plow Tavern in York, PA, is a very unusual American building. It is built with corner post construction on the ground floor, half-timbered style of timber framing on the upper floor and has a less common style of wood roof shingles than typical in America.
Pores can also be filled using multiple coats of the final finish rather than a pore filler. [1] [2] The main problem in using putty is matching the colour of the putty to that of the wood. Putties are usually sanded after they dry before applying the finish. Many different brands, types, and colours are commercially available.