Ads
related to: internet splitter
Search results
Results From The WOW.Com Content Network
The FBT splitter is one of the most common. FBT splitters are widely accepted and used in passive networks, especially for instances where the split configuration is smaller (1×2, 1×4, 2×2, etc.). [1] The PLC is a more recent technology. PLC splitters offer a better solution for larger applications.
Modern ADSL filter/splitter (left) and filter (right). ADSL works by using spectrum above the band used by voice telephone calls. [1] With a DSL filter, often called splitter, the frequency bands are isolated, permitting a single telephone line to be used for both ADSL service and telephone calls at the same time.
Data Over Cable Service Interface Specification Provisioning of Ethernet Passive Optical Network, or DPoE, is a set of CableLabs specifications that implement the DOCSIS service layer interface on existing Ethernet PON (EPON, GEPON or 10G-EPON) media access control (MAC) and physical layer (PHY) standards. In short it implements the DOCSIS ...
The room measures about 24 by 48 feet (7.3 by 14.6 m) and contains several racks of equipment, including a Narus STA 6400, a device designed to intercept and analyze Internet communications at very high speeds. [1] It is fed by fiber optic lines from beam splitters installed in fiber optic trunks carrying Internet backbone traffic. [3]
A DSL filter (also DSL splitter or microfilter) is an analog low-pass filter installed between analog devices (such as telephones or analog modems) and a plain old telephone service (POTS) line. The DSL filter prevents interference between such devices and a digital subscriber line (DSL) service connected to the same line.
Depending on the design of the network, the signal can then be passed through a splitter to multiple TVs or to multiple set top boxes (cable boxes) which may then be connected to a TV. If too many splitters are used to connect multiple TVs, the signal levels will decrease, and picture quality on analog channels will decrease.