Search results
Results From The WOW.Com Content Network
A Johnson bar activated parking/emergency brake on a 1930s White transit bus. Johnson bar is the term for several different hand-operated levers used in vehicles. Their distinguishing feature is a positive latch, typically spring-loaded, to hold the lever in a selected position, capable of being operated with one hand.
A Panhard rod (also called Panhard bar, track bar, or track rod) is a suspension link that provides lateral location of the axle. [1] Originally invented by the Panhard automobile company of France in the early twentieth century, this device has been widely used ever since.
Some tractor operators have raised concerns about using ROPS in low-clearance environments, such as in orchards and buildings. In response, NIOSH developed an Automatically Deploying Rollover Protective Structure (AutoROPS) which stays in a lowered position until a rollover condition is determined, at which time it deploys to a fully extended and locked position.
Jansen's linkage is an eight-bar leg mechanism that was invented by kinetic sculptor Theo Jansen. Klann linkage is a six-bar linkage that forms a leg mechanism; Toggle mechanisms are four-bar linkages that are dimensioned so that they can fold and lock. The toggle positions are determined by the colinearity of two of the moving links. [19]
and it is seen that the output drive is just 90 degrees out of phase with the input shaft, yielding a constant-velocity drive. NOTE: The reference for measuring angles of input and output shafts of universal joint are mutually perpendicular axes. So, in absolute sense the forks of the intermediate shaft are parallel to each other.
An anti-roll bar (roll bar, anti-sway bar, sway bar, stabilizer bar) is an automobile suspension part that helps reduce the body roll of a vehicle during fast cornering or over road irregularities. It links opposite front or rear wheels to a torsion spring using short lever arms for anchors.
For vehicles with leaf spring suspension such as pickup trucks, the leaf spring is sometimes eliminated and replaced with a multiple-bar linkage. These bars are typically in a trailing arm configuration and the air spring may be situated vertically between a link bar or the axle housing and a point on the vehicle's frame. In other cases, the ...
In the case of tractor trucks, an additional S (BBS) denotes tractor truck configuration (S = Sattelzugmaschinen/tractor unit). [7] [9] HX trucks are of a conventional design and are based on a single piece C-section ladder-frame chassis of profiles determined by a mix of GVWR, intended usage, and configuration.