Ads
related to: 3/4 plywood
Search results
Results From The WOW.Com Content Network
The most common dimension is 1.2 by 2.4 metres (3 ft 11 in × 7 ft 10 in) or the slightly larger imperial dimension of 4 feet × 8 feet. Plies vary in thickness from 1.4 mm to 4.3 mm. The number of plies—which is always odd—depends on the thickness and grade of the sheet. Roofing can use the thinner 16-millimetre (5 ⁄ 8 in) plywood.
Moisture Content-- BS 1088 plywood must have a moisture content between 6% and 14% when it leaves the factory. Finishing-- Boards will be sanded on both sides equally. Length & Width-- The length or width of a board produced as a standard size shall not be less than the specified size nor more than 6.3 mm (0.25") greater than the specified size.
For example, splitting a 10-foot-long (3.0 m) 2×4 (1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 in or 38 by 89 mm) into two 1×4s (3 ⁄ 4 by 3 + 1 ⁄ 2 in or 19 by 89 mm) of the same length is considered re-sawing. Plastic lumber
Plywood and OSB typically have a density of 560–640 kg/m 3 (35–40 lb/cu ft). For example, 9.5 mm (3 ⁄ 8 in) plywood sheathing or OSB sheathing typically has a surface density of 4.9–5.9 kg/m 2 (1–1.2 lb/sq ft). [51] Many other engineered woods have densities much higher than OSB.
APA – The Engineered Wood Association is the nonprofit trade association of the U.S. and Canadian engineered wood products industry. Based in Tacoma, Washington, the Association is composed of and represents manufacturers of structural plywood, oriented strand board (OSB), cross-laminated timber, glued laminated (glulam) timber, wood I-joists, laminated veneer lumber (LVL) and other ...
Meanwhile, in a small saucepan over medium heat, cook 1/2 c. sugar and 1/2 c. water, stirring frequently, until sugar dissolves and starts to simmer around the edges, about 4 minutes. Remove from ...