Ad
related to: ddr2 meaning computer
Search results
Results From The WOW.Com Content Network
The notch on DDR2 DIMMs is in a different position from DDR DIMMs, and the pin density is higher than DDR DIMMs in desktops. DDR2 is a 240-pin module, DDR is a 184-pin module. Notebooks have 200-pin SO-DIMMs for DDR and DDR2; however, the notch on DDR2 modules is in a slightly different position than on DDR modules.
None of its successors are forward or backward compatible with DDR1 SDRAM, meaning DDR2, DDR3, DDR4 and DDR5 memory modules will not work on DDR1-equipped motherboards, and vice versa. Compared to single data rate ( SDR ) SDRAM, the DDR SDRAM interface makes higher transfer rates possible through more strict control of the timing of the ...
Corresponding 240-pin DIMMs are known as PC2-3200 through PC2-6400. DDR2 SDRAM is now available at a clock rate of 533 MHz generally described as DDR2-1066 and the corresponding DIMMs are known as PC2-8500 (also named PC2-8600 depending on the manufacturer). Performance up to DDR2-1250 (PC2-10000) is available.
Two types of DIMMs (dual in-line memory modules): a 168-pin SDRAM module (top) and a 184-pin DDR SDRAM module (bottom). Memory modules of SK Hynix. In computing, a memory module or RAM stick is a printed circuit board on which memory integrated circuits are mounted.
Notch positions on DDR (top) and DDR2 (bottom) DIMM modules. On the bottom edge of 168-pin DIMMs there are two notches, and the location of each notch determines a particular feature of the module. The first notch is the DRAM key position, which represents RFU (reserved future use), registered , and unbuffered DIMM types (left, middle and right ...
Motherboard of the NeXTcube computer, 1990, with 64 MiB main memory DRAM (top left) and 256 KiB of VRAM [2] (lower edge, right of middle) Dynamic random-access memory ( dynamic RAM or DRAM ) is a type of random-access semiconductor memory that stores each bit of data in a memory cell , usually consisting of a tiny capacitor and a transistor ...
A module composed of Micron Technology MT47H128M16 chips with the organization 128 Mib × 16, meaning 128 Mi memory depth and 16-bit-wide data bus per chip; if the module has 8 of these chips on each side of the board, there would be a total of 16 chips × 16-bit-wide data = 256 total bits width of data. For a 64-bit-wide memory data interface ...
The naming convention for DDR, DDR2 and DDR3 modules specifies either a maximum speed (e.g., DDR2-800) or a maximum bandwidth (e.g., PC2-6400). The speed rating (800) is not the maximum clock speed, but twice that (because of the doubled data rate). The specified bandwidth (6400) is the maximum megabytes transferred per second using a 64-bit width.