Search results
Results From The WOW.Com Content Network
Diagram of cylinder and piston valve. The valve is next opened by moving it to the right, allowing the clear space in the middle of the valve to align with the channel in the cylinder above it. Piston valves are one form of valve used to control the flow of steam within a steam engine or locomotive.
Collects steam at the top of the boiler (well above the water level) so that it can be fed to the engine via the main steam pipe, or dry pipe, and the regulator/throttle valve. [2] [5] [6]: 211–212 [3]: 26 Air pump / Air compressor Westinghouse pump (US+) Powered by steam, it compresses air for operating the train air brake system.
A return connecting rod, [1] [2] return piston rod [i] or (in marine parlance) double piston rod engine [2] or back-acting engine is a particular layout for a steam engine. The key attribute of this layout is that the piston rod emerges from the cylinder to the crosshead , but the connecting rod then reverses direction and goes backwards to the ...
The 2.9L M57, which is found in E39 530d and E38 730d, as well as early models of E46 330d and E53 X5, is equipped with one Garrett GT2556V turbocharger. The 2.5L M57TÜ uses a Garrett GT2056V turbocharger, the 3.0L M57TÜ a Garrett GT2260V turbocharger, the M57TÜ2 a Garrett GTB2260VK turbocharger, whilst the M57D30TÜTOP sports a BorgWarner ...
The cylinder is the power-producing element of the steam engine powering a steam locomotive. The cylinder is made pressure-tight with end covers and a piston; a valve distributes the steam to the ends of the cylinder. Cylinders were initially cast iron, but later made of steel.
A double acting engine is an engine where steam is applied to both sides of the piston. Earlier steam engines applied steam in only one direction, allowing momentum or gravity to return the piston to its starting place, but a double acting engine uses steam to force the piston in both directions, thus increasing rotational speed and power. [50]
A high-pressure steam locomotive is a steam locomotive with a boiler that operates at pressures well above what would be considered normal for other locomotives. Most locomotives operate with a steam pressure of 200 to 300 psi (1.38 to 2.07 MPa). [1] In the later years of steam, boiler pressures were typically 200 to 250 psi (1.38 to 1.72 MPa).
Due to the height restrictions of the locomotive, the so-called front head consisted of two parallel cylinders, into which the 70 Brotan 85/95 mm pipes, which formed the side of the firebox, ran. At the time of its construction, the steam boilers of MÁV's 601 series locomotives were the largest Brotan boilers in Europe in terms of size and power.