Search results
Results From The WOW.Com Content Network
The flames caused as a result of a fuel undergoing combustion (burning) Air pollution abatement equipment provides combustion control for industrial processes.. Combustion, or burning, [1] is a high-temperature exothermic redox chemical reaction between a fuel (the reductant) and an oxidant, usually atmospheric oxygen, that produces oxidized, often gaseous products, in a mixture termed as smoke.
Combustion models for CFD refers to combustion models for computational fluid dynamics. Combustion is defined as a chemical reaction in which a fuel reacts with an oxidant to form products, accompanied with the release of energy in the form of heat.
Homogeneous charge compression ignition (HCCI) is a form of internal combustion in which well-mixed fuel and oxidizer (typically air) are compressed to the point of auto-ignition. As in other forms of combustion, this exothermic reaction produces heat that can be transformed into work in a heat engine.
Later, still during compression cycle, high-reactivity fuel is injected to form a local mixture of low- and high-reactivity fuel. Finally the whole fuel charge is ignited near top dead center of the piston by injection of high-reactivity fuel. The RCCI combustion process requires two different fuels.
Fluidized bed combustion (FBC) is a combustion technology used to burn solid fuels. In its most basic form, fuel particles are suspended in a hot, bubbling fluidity bed of ash and other particulate materials ( sand , limestone etc.) through which jets of air are blown to provide the oxygen required for combustion or gasification.
The blue flame sustains itself after the sparks stop because the continued combustion of the flame is now energetically favorable. In the Arrhenius model of reaction rates, activation energy is the minimum amount of energy that must be available to reactants for a chemical reaction to occur. [1]
Incomplete reaction at higher temperature further curtails the effect of a larger heat of combustion. [citation needed] Because most combustion processes that happen naturally occur in the open air, there is nothing that confines the gas to a particular volume like the cylinder in an engine.
Selective non-catalytic reduction (SNCR) is a method to lessen nitrogen oxide emissions in conventional power plants that burn biomass, waste and coal.The process involves injecting either ammonia or urea into the firebox of the boiler at a location where the flue gas is between 1,400 and 2,000 °F (760 and 1,090 °C) to react with the nitrogen oxides formed in the combustion process.