Search results
Results From The WOW.Com Content Network
Truss rods are frequently made out of steel, though graphite and other materials are sometimes used.. The truss rod can be adjusted to compensate for expansion or contraction in the neck wood due to changes in humidity or temperature, or to compensate for changes in the tension of the strings (the thicker the guitar string, the higher its tension when tuned to correct pitch) or using different ...
On a typical steel string acoustic guitar, for example, the action is adjusted by carefully sanding the guitar's saddle so that the strings sit closer to the fretboard. [1] The action on a guitar is also slightly affected by the adjustment of the truss rod. Tightening the truss rod bends the neck backwards, lowering the action—and loosening ...
The bending stress on the neck is considerable, particularly when heavier gauge strings are used, and the ability of the neck to resist bending is important to the guitar's ability to hold a constant pitch during tuning or when strings are fretted. The rigidity of the neck with respect to the body of the guitar is one determinant of an ...
Generally the thicker the string, the shorter the effective length. This refers to the length of string involved in producing a sound, as opposed to the length between the nut and the bridge. Many guitar designs with fixed bridges have the bridge slanted or stepped so that the distance from the nut to the bridge is larger for thick strings.
A vibrato system on a guitar is a mechanical device used to temporarily change the pitch of the strings. It adds vibrato to the sound by changing the tension of the strings, typically at the bridge or tailpiece of an electric guitar using a controlling lever, which is alternately referred to as a whammy bar, vibrato bar, or tremolo arm. [1]
string pops and slaps (fingerboard instruments) preparation of a guitar by inserting screws or pieces of metal in the bridge or between the strings. detuning a string while playing "3rd bridge", a guitar technique using the part of the string between the nut and the stopping finger; see Xenakis' cello piece Nomos Alpha for a similar effect.
Zero fret on a Hopf Saturn 63 electric guitar. A zero fret is a fret placed at the headstock end of the neck of a banjo, guitar, mandolin, or bass guitar. It serves one of the functions of a nut: holding the strings the correct distance above the other frets on the instrument's fretboard. A separate string-guide (often a regular nut) is still ...
Novice players should not attempt this, as the guitar neck can easily be damaged or broken. As the wood of the guitar neck is affected by temperature and humidity (weather and climate), relief may change with these altering conditions. Compensation for this may be required if fret buzz occurs, by adjusting the truss rod.