Search results
Results From The WOW.Com Content Network
Blast furnaces differ from bloomeries and reverberatory furnaces in that in a blast furnace, flue gas is in direct contact with the ore and iron, allowing carbon monoxide to diffuse into the ore and reduce the iron oxide. The blast furnace operates as a countercurrent exchange process whereas a bloomery does not.
Conventional blast furnaces used for smelting iron ore use a hot blast. Water jacket furnaces most commonly used a cold air blast, typically provided by a positive-displacement blower, such as a Roots blower. Preheating of the air blast was used on some water jacket furnaces, but preheating of the blast had no advantage when the furnace was ...
Blast furnace gas (BFG) [1] is a by-product of blast furnaces that is generated when the iron ore is reduced with coke to metallic iron. It has a very low heating value , about 3.5 MJ/m 3 (93 BTU /cu.ft), [ 2 ] because it consists of about 51 vol% nitrogen and 22 vol% carbon dioxide , which are not flammable.
For blast furnaces, direct reduction corresponds to the reduction of oxides by the carbon in the coke. However, in practice, direct reduction only plays a significant role in the final stage of iron reduction in a blast furnace, by helping to reduce wustite (FeO) to iron. In this case, the chemical reaction can be trivially described as follows ...
The blast furnace method is expected to survive into the 22nd century because of its efficient rate of iron production at competitive costs compared with other iron-making methods. Blast furnaces keep on improving with adaptations arising from new technologies driven by rising global demand, yet the main chemical process remains the same. But ...
As blast furnaces re-equipped after World War II, the favoured power source was either the diesel engine or the electric motor. These both had a rotary output, which worked well with contemporary developments in centrifugal fans capable of handling the huge volumes of air. Although the reciprocating steam blowing engine continued where it was ...
During this continuous process more raw materials are placed at the top, and as the coke moves down, it must withstand the ever-increasing weight of the materials above it. It is the ability to withstand this crushing force, in addition to its high energy content and rapid combustion, that makes coke ideal for use in blast furnaces.
The furnace was constructed circa 1847 by George W. Bryan, who named the furnace "fanny" for his wife. . Unlike earlier bloomery furnaces that produced wrought iron, the Valley Furnace was a blast furnace that produced pig iron using a bellows to induce a forced draft, using charcoal as a fuel. Ore was provided from surface mines that exploited ...