Search results
Results From The WOW.Com Content Network
Under color removal is used in process color printing. Black ink used to add details and darkness in shadowed areas is called a skeletal black. With current [as of?] ink technology, the total CMYK ink in the shadows refuses to stick after it reaches the dark shadows (usually above a 250% total CMYK coverage), and begins to peel off.
The trap is not visible since the lighter color is spread underneath the—almost—opaque black. For the same reason, in many cases, black ink is set to "overprint" colors in the background, eliminating the more complex process of spreading or choking. Since black is a dark color, white gaps caused by misregistration are more visible.
The HP DeskJet 520 introduced resolution enhancement technology, or REt, to HP inkjet printers. It was also HP's last black-and-white-only inkjet printer. The HP DeskJet 500, 510, 520, 500C, 550C, and 560C were all replaced by the HP DeskJet 540 (3 ppm B&W, 1.5 minutes per page color). A one-pen inkjet printer, color was optional.
In printing, bleed is printing that goes beyond the edge of where the sheet will be trimmed. In other words, the bleed is the area to be trimmed off. The bleed is the part on the side of a document that gives the printer a small amount of space to account for natural movement of the paper during guillotining, [1] and design inconsistencies ...
The CMYK color model (also known as process color, or four color) is a subtractive color model, based on the CMY color model, used in color printing, and is also used to describe the printing process itself. The abbreviation CMYK refers to the four ink plates used: cyan, magenta, yellow, and key (most often black).
In printing and graphic arts, mixing of two dissimilar colors in two adjacent printed dots before they dry and absorb in substrate is referred to as color bleeding. [1] Unless it is done for effect, color bleeding reduces print quality. Prior art applied this term to the phenomenon of single color ink following the fibers of the paper. [2]
The "K" is a black component normally added in ink-jet and other mechanical printing processes to compensate for the imperfections of the colored inks used, which ideally should absorb or transmit various parts of the spectrum but not reflect any color, and to improve image definition.
A method of full-color printing is six-color process printing (for example, Pantone's Hexachrome system) which adds orange and green to the traditional CMYK inks for a larger and more vibrant gamut, or color range. However, such alternate color systems still rely on color separation, halftoning and lithography to produce printed images.