When.com Web Search

  1. Ads

    related to: slim pc power supply pinout

Search results

  1. Results From The WOW.Com Content Network
  2. Power supply unit (computer) - Wikipedia

    en.wikipedia.org/wiki/Power_supply_unit_(computer)

    For example, a 900-watt power supply with the 80 Plus Silver efficiency rating (which means that such a power supply is designed to be at least 85% efficient for loads above 180 W) may only be 73% efficient when the load is lower than 100 W, which is a typical idle power for a desktop computer. Thus, for a 100 W load, losses for this supply ...

  3. PS-ON Signal - Wikipedia

    en.wikipedia.org/wiki/PS-ON_Signal

    #PS_ON pin is marked by number 16. PS-ON Signal is a pin on a 20-pin or 24-pin ATX-specified power connector used to turn a personal computer power supply unit on/off. The PS_ON pin is normally pulled high in an open-circuit, but will turn on the power supply when it is pulled low, by shorting it to the common signal (COM).

  4. ATX - Wikipedia

    en.wikipedia.org/wiki/ATX

    An ATX power supply provides a number of peripheral power connectors and (in modern systems) two connectors for the motherboard: an 8-pin (or 4+4-pin) auxiliary connector providing additional power to the CPU and a main 24-pin power supply connector, an extension of the original 20-pin version. 20-pin Molex 39-29-9202 at the motherboard. 20-pin ...

  5. PlayStation 3 technical specifications - Wikipedia

    en.wikipedia.org/wiki/PlayStation_3_technical...

    The power supply can operate on both 60 Hz and 50 Hz power grids. It uses a standard IEC 60320 C14 (IEC 60320 C8 for the PS3 slim) connector and a C13 (C7 for the PS3 slim) power cord appropriate for the region it is being used in. The power supply on the "fat" model is 380 W. This was reduced to 250 W in the 120 GB "Slim" model.

  6. 16-pin 12VHPWR connector - Wikipedia

    en.wikipedia.org/wiki/16-Pin_12vHPWR_connector

    The 16-pin 12VHPWR connector is a standard for connecting graphics processing units (GPUs) to computer power supplies for up to 600 W power delivery. It was introduced by Nvidia in 2022 to supersede the previous 6- and 8-pin power connectors for GPUs. The stated aim was to cater to the increasing power requirements of Nvidia GPUs.

  7. Power good signal - Wikipedia

    en.wikipedia.org/wiki/Power_good_signal

    The ATX specification requires that the power-good signal ("PWR_OK") go high no sooner than 100 ms after the power rails have stabilized, and remain high for 16 ms after loss of AC power, and fall (to less than 0.4 V) at least 1 ms before the power rails fall out of specification (to 95% of their nominal value).