Ad
related to: vfr clearance sheet download
Search results
Results From The WOW.Com Content Network
Under visual meteorological conditions, the minimum visual range, distance from clouds, or cloud clearance requirements to be maintained above ground vary by jurisdiction, and may also vary according to the airspace in which the aircraft is operating. [4] In some countries, VFR flight is permitted at night, and is known as night VFR.
VFR / VMC visibility requirements in the US. In aviation, visual meteorological conditions (VMC) is an aviation flight category in which visual flight rules (VFR) flight is permitted—that is, conditions in which pilots have sufficient visibility to fly the aircraft maintaining visual separation from terrain and other aircraft.
Pilots must request air traffic controllers (ATC) to obtain the VFR-on-top clearance. ATC authorization will include a cloud top report and a request to report upon reaching the top; it may also include a clearance limit, routing, and an alternative clearance if VFR-on-top is not reached by a specified altitude.
Maximum elevation figure (MEF) is a type of visual flight rule (VFR) information that indicates the elevation of the highest geographical feature within a GEOREF quadrangle area. It is of interest to pilots, who want to be aware of the highest mountain peaks and tall towers nearby, so that they can fly above them to avoid controlled flight into ...
The flight should climb to and maintain 5000 feet initially, and further clearance to FL330 may be expected (but is not guaranteed) ten minutes after departure. The frequency to which the crew should tune after departure is 124.50 MHz, and the transponder should be set to 6562 before departure.
VFR visibility and cloud clearance requirements are the same as for class C and D airspaces when below 10,000 feet (3,000 m) MSL. Above 10,000 ft MSL, the visibility requirement is extended to 5 miles (8 km) and the cloud clearance requirement is extended to 1,000 feet (300 m) below clouds, 1,000 feet (300 m) above, and 1 mile (1.6 km) laterally.
Flight under SVFR is only allowed in controlled airspace, and always requires clearance from air traffic control (ATC). [4] It usually happens when the aircraft is inside controlled airspace, and the local weather is less than the minimums required for flight under visual flight rules (VFR) within the airspace in question.
Upon each landing, depending on the runway distance remaining, aircraft and pilot capabilities, noise abatement procedures in effect, and air traffic control clearance, the pilot will perform either a full stop landing (taxi to the runway beginning for subsequent take-off), a touch-and-go (stabilize in the landing roll, reconfigure the aircraft ...