Ads
related to: usb pin layout
Search results
Results From The WOW.Com Content Network
(USB-PD A and B plugs have a mechanical mark while Micro plugs have a resistor or capacitor attached to the ID pin indicating the cable capability.) USB-PD Devices can request higher currents and supply voltages from compliant hosts—up to 2 A at 5 V (for a power consumption of up to 10 W), and optionally up to 3 A or 5 A at either 12 V (36 W ...
Type-C receptacle B pin layout Pin Name Description B12 GND Ground return B11 SSRXp1 SuperSpeed differential pair #2, RX, positive B10 SSRXn1 SuperSpeed differential pair #2, RX, negative B9 V BUS: Bus power B8 SBU2 Sideband use (SBU) B7 Dn2 USB 2.0 differential pair, position 2, negative [a] B6 Dp2 USB 2.0 differential pair, position 2 ...
USB was designed to standardize the connection of peripherals to personal computers, both to exchange data and to supply electric power. It has largely replaced interfaces such as serial ports and parallel ports and has become commonplace on various devices.
USB-C plug USB-C (SuperSpeed USB 5Gbps) receptacle on an MSI laptop. USB-C, or USB Type-C, is a 24-pin, reversible connector (not a protocol) that supersedes previous USB connectors and can carry audio, video, and other data, to connect to monitors, external drives, hubs/docking stations, mobile phones, and many more peripheral devices.
USB 3.2 Gen 2x1 – newly marketed as SuperSpeed USB 10 Gbps (replaces SuperSpeed+ or SS+), [63] 10 Gbit/s signaling rate over 1 lane using 128b/132b encoding (raw data rate: 1212 MB/s); replaces USB 3.1 Gen 2. USB 3.2 Gen 1x2 – new, 10 Gbit/s signaling rate over 2 lanes using 8b/10b encoding (raw data rate: 1000 MB/s).
The written USB 3.0 specification was released by Intel and its partners in August 2008. The first USB 3.0 controller chips were sampled by NEC in May 2009, [4] and the first products using the USB 3.0 specification arrived in January 2010. [5] USB 3.0 connectors are generally backward compatible, but include new wiring and full-duplex operation.
Apple Lightning to USB-A cable. Lightning is an 8-pin digital connector. Unlike the 30-pin dock connector it replaced (and USB Type-A and -B connectors), it is reversible. [23] Most Lightning devices only support USB 2.0, which has a maximum transfer speed of 480 Mbit/s or 60 MB/s. With USB 2.0, only one lane is in use at a time.
Most flash drives use a standard type-A USB connection allowing connection with a port on a personal computer, but drives for other interfaces also exist (e.g. micro-USB and USB-C ports). USB flash drives draw power from the computer via the USB connection.