Ads
related to: metric to standard socket conversion- Machine Screws
In Nylon, Stainless Steel & more
Wholesale Industrial Grade Fastener
- Bolts
Varied bolts for all applications.
Cadmium, Stainless Steel, & Zinc.
- Screws
Self-Drilling & Self-Tapping screws
Sheet Metal & Self-Piercing screws.
- Contact Us
Fill Out the Form Or Call Us
To Get Your Queries Answered.
- Machine Screws
Search results
Results From The WOW.Com Content Network
BS 546, Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors for AC (50–60 Hz) circuits up to 250 V is an older British Standard for three-pin AC power plugs and sockets. Originally published in April 1934, it was updated by a 1950 edition which is still current, [1] with eight amendments up to 1999. BS 546 is also the ...
The table below shows dimensions of metric spanners for selected sizes of metric threads. [2] Note that with ISO 272 1982 the width across flats for M10, M12, M14 and M22 were changed from 17, 19, 22 and 32 mm respectively to the current standard.
The CEE 7/5 socket and CEE 7/6 plug are defined in French standard NF C 61-314 "Plugs and socket-outlets for household and similar purposes" (which also includes CEE 7/7, 7/16 and 7/17 plugs) The socket has a predominantly circular recess which is 15 mm (0.591 in) deep with two symmetrical round apertures and a round 4.8 mm (0.189 in) earth pin ...
The maximum voltage allowed by the standard is 1000 V DC or AC; the maximum current, 800 A; and the maximum frequency, 500 Hz. The ambient temperature range is −25 °C to 40 °C. [3] There is a range of plugs and sockets of different sizes with differing numbers of pins, depending on the current supplied and number of phases accommodated.
IEC metric screw sized connectors is a family of electrical connectors defined by IEC that are named according to their ISO metric screw thread, namely M5, M8 and M12. [1] The number gives their outer screw thread diameter in millimeters as with the identically named screws.
Standard and special fasteners like alloys, nuts, bolts, washers, studs, self-tapping, self drilling screws and socket screws are often quoted in both imperial and metric; products range from 2 ⁄ 56 in (0.91 mm) diameter up to 4 in (100 mm). [21]