Ads
related to: ratchet stop micrometer
Search results
Results From The WOW.Com Content Network
Pitch-diameter micrometers (aka thread mics) have a matching set of thread-shaped tips for measuring the pitch diameter of screw threads. Limit mics have two anvils and two spindles, and are used like a snap gauge. The part being checked must pass through the first gap and must stop at the second gap in order to be within specification.
English: Illustration of a micrometer caliper. The micrometer is showing a measurement of 7.145 mm ± 0.005 mm. Legend: Anvil: part that the spindle moves toward, and that the sample rests against; Spindle: moved by the thimble towards the anvil; Ratchet stop: limits applied pressure by slipping at a calibrated torque
A ratchet (occasionally spelled rachet) is a mechanical device that allows continuous linear or rotary motion in only one direction while preventing motion in the opposite direction. Ratchets are widely used in machinery and tools. The word ratchet is also used informally to refer to a ratcheting socket wrench.
In an article written by J. Bree in 1967, [3] the phenomenon of ratcheting is described as "Unsymmetric cycles of stress between prescribed limits will cause progressive ‘creep’ or ‘ratchet(t)ing’ in the direction of the mean stress".
Micrometer can mean: Micrometer (device), used for accurate measurements by means of a calibrated screw; Micrometre, a millionth of a metre
This ratchet was a very successful design, lasting from its introduction in 1961 to the eventual closure of New Britain in the 1980s. The ratchet was a compression engagement, using 12 teeth with a 60 tooth ratchet count. Later ratchets, from 1971 and onward, used a 9 tooth pawl making the ratchet a 45 tooth count.