Ads
related to: diamond 2 meter base antenna
Search results
Results From The WOW.Com Content Network
This antenna radiates maximally in directions perpendicular to the antenna's axis, giving it a small directive gain of 2.15 dBi (2.15 dBi means that in the direction of maximum radiation, signal strength is 1.64× the signal from a directionless "isotropic" antenna).
[2] (pp 79–81) One of the first types used was the diamond cantilever or Blaw-Knox tower. This had a diamond (rhombohedral) shape which made it rigid, so only one set of guy lines was needed, at its wide waist. The pointed lower end of the antenna ended in a large ceramic insulator in the form of a ball-and-socket joint on a concrete base ...
The diamond-shaped tower was patented by Nicholas Gerten and Ralph Jenner for Blaw-Knox July 29, 1930. [5] and was one of the first mast radiators.[1] [6] Previous antennas for medium and longwave broadcasting usually consisted of wires strung between masts, but in the Blaw-Knox antenna, as in modern AM broadcasting mast radiators, the metal mast structure functioned as the antenna. [1]
Antenna directivity is the ratio of maximum radiation intensity (power per unit surface) radiated by the antenna in the maximum direction divided by the intensity radiated by a hypothetical isotropic antenna radiating the same total power as that antenna. For example, a hypothetical antenna which had a radiated pattern of a hemisphere (1/2 ...
A rhombic antenna is made of four sections of wire suspended parallel to the ground in a diamond or "rhombus" shape. Each of the four sides is the same length – about a quarter-wavelength to one wavelength per section – converging but not touching at an angle of about 42° at the fed end and at the far end.
The discone antenna has a useful frequency range of at least 10 to 1. [2] [3] When employed as a transmitting antenna, a properly constructed discone is just as efficient as an antenna designed for a more limited frequency range. The extra bandwidth comes from the controlled taper and large termination radius of the cone.