Ad
related to: gm 5.3l l83 engine specs chart pictures pdf model
Search results
Results From The WOW.Com Content Network
The 1982 L83 was again the only Corvette engine, producing 200 hp (149 kW) and 285 lb⋅ft (386 N⋅m) of torque from 9.0:1 compression. Since GM did not assign a 1983 model year to production Corvettes, there was no L83 for 1983. [22] This was also the only engine on the 1984 Corvette, at 205 hp (153 kW) and 290 lb⋅ft (393 N⋅m) of torque.
The 4.8L and the 5.3L are smaller truck versions of the LS1 and were designed to replace the 305 and the 350 in trucks. The 4.8L and 5.3L engines share the same Gen III LS-series engine block and heads (upper end) and therefore, most parts interchange freely between these engines and other variants in the LS family.
The Chevrolet small-block engine refers to one of the several gasoline-powered vehicle engines manufactured by General Motors. These include: The first or second generation of non-LS Chevrolet small-block engines; The third, fourth, or fifth generation of LS-based GM engines; The Chevrolet Gemini small-block engine
This was so named because it began with Chevrolet's V8 engines. Chevrolet big-block V8s; Chevrolet small-block V8s; GM Vortec 4300 90° V6; GM Iron Duke RWD inline 4 (early RWD Variants, later versions may use a FWD pattern, and have two possible starter locations) Jeep with GM Iron Duke inline 4 2.5L/151 in 3 (1980-1983).
GM says this engine weighs 216 pounds (98 kg), ready for installation. [2] The engines debuted in the 2014 Opel Adam [3] and are produced in Szentgotthárd, Hungary, [4] and GM's Flint Engine plant. [5] By 2018, the new engine family had spread to other brands and markets and had replaced three separate engine families (S-TEC, Family 0, and ...
SIDI (Spark Ignition Direct Injection) Ecotec – petrol Medium Gasoline Engine produced by Adam Opel AG. EcoTec3 is the name used on General Motors' Small Block Gen 5 Engines. All include direct injection, cylinder deactivation, and continuously variable valve timing, either in V6 form of 4.3L or V8 form of either 5.3L or 6.2L.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
The 4.3 L (262.5 cu in) LV3 V6 is an all-new engine announced by GM at the end of 2012. GM considers this a new engine design which inherits from its predecessors its displacement, 2-valve pushrod valvetrain, 90-degree cylinder angle, and 4.4 in (111.8 mm) bore centers.