Ads
related to: 24 inch plotter paper roll- CAD & Graphics Printers
World-class Wide-format Performance
Workplace & Print Shop Solutions
- Mid-size Office Printers
Mid-range CAD Printers
For Fast Performance.
- Small Office Printers
Entry-level CAD Printers
Appropriately Sized and Scaled.
- Epson T-Series Printers
Brilliant by Design Office Printers
Made to Enhance the Way You Work
- Production-class Printers
Production-class Speeds
in a Small Footprint. Learn More.
- T-Series Buyer's Guide
Download the Guide Today.
Choose the Right T-Series for You.
- CAD & Graphics Printers
Search results
Results From The WOW.Com Content Network
The electrostatic plotter uses the pixel as a drawing means, like a raster graphics display device. The plotter head consists of a large number of tiny styluses (as many as 21760) embedded in it. This head traverses over the width of the paper as it rolls past the head to make a drawing. The resolutions available may be 100 to 508 dots per inch.
The Model 37 has a recommended maintenance interval of every six months or every 1500 hours. The Model 37 is 36.25 inches high. The Model 37 ASR and KSR are 27.5 inches deep. The Model 37 RO is 24.25 inches deep. The Model 37 ASR weighs 340 pounds. The Model 37 KSR and RO weighs approximately 185 pounds. 4100 Paper Tape Equipment (1972)
The standard size 1627 Model 1 was a Calcomp model 565 plotter and used 12-inch-wide paper (305 mm) with a plotting area of 11 inches (280 mm). Model 1 could operate at 18,000 steps per minute. Model 2 was a Calcomp 563 and used 31-inch-wide paper (787 mm) with a plotting area of 29 + 1 ⁄ 2 inches (750 mm). Model 2 could operate at 12,000 ...
7.5 82143A thermal printer/plotter. ... 3 1 ⁄ 2-inch floppy disk drives, ... The printer used rolls of thermal paper to print lines of up to 24 characters. The ...
Later, Calcomp manufactured its model 563, which was very similar but had a 30-inch (760 mm) wide drum. The paper rolls were 120 feet (37 m) long. A metal bar above the take-up reel allowed a finished plot to be torn off and removed. The drum would then be advanced using the manual controls and the fresh paper end taped to the take-up reel.
A set of rollers were added to allow the plotter to move a single 96-inch-wide (2,400 mm) piece of paper around the drawing surface on demand, meaning that the paper did not have to be cut into pieces. The paper was delivered in rolls, allowing diagrams to be any length. [2]
Ads
related to: 24 inch plotter paper roll