Search results
Results From The WOW.Com Content Network
The Turbo-Hydramatic or Turbo Hydra-Matic (THM) series was developed to replace both the original Hydra-Matic models and the Buick Dynaflow. In its original incarnation as the Turbo-Hydramatic 400, it was first used in the 1964 model year in Cadillacs. The Buick version, which followed shortly thereafter, was known as the Super-Turbine 400.
This same transmission is used in the Saturn Vue Green Line hybrid vehicle with the addition of an auxiliary oil pump and hybrid-aware electronics. It is designed for 3.0–3.5 L engines producing up to 205 ft·lbf (278 N·m) of torque, but was also commonly mated to some versions of GM's 4-cylinder Ecotec line.
The TH400 was phased out for the 1980 models, when the A-727 replaced the TH-400 as the only automatic transmission option for both the SJ Wagoneer/Cherokee wagons and the J-10/J-20 trucks. Internally similar to the Chrysler A-727, the case was one-piece, cast with an AMC pattern bellhousing (not interchangeable with a Chrysler pattern A-727).
A Hydra-Matic 4L80 transmission at the Ypsilanti Automotive Heritage Museum The 4L80-E ( RPO MT1) is rated to handle engines with up to 440 ft·lbf (597 N·m) of torque. [ 2 ] The 4L80-E is rated to a maximum GVWR of 18,000 lb, depending on the axle and vehicle.
Transmission broadcast codes in 2005 for the ECCC transmission are 5ABN and 5MMN. [1] The 4T80-E is a hydramatic transmission and was developed for use with V8 front-wheel-drive cars, and at the time exclusively the Cadillac Northstar engine. [3] It was designed with extreme power handling capabilities at the time.
The first class of turbo code was the parallel concatenated convolutional code (PCCC). Since the introduction of the original parallel turbo codes in 1993, many other classes of turbo code have been discovered, including serial concatenated convolutional codes and repeat-accumulate codes. Iterative turbo decoding methods have also been applied ...
Turbo-Hydramatic 425 (TH425 or THM 425, [1] later 325) was an automatic transmission developed and produced by General Motors. The THM425 was a derivative of the THM400; most parts directly interchange and some others will interchange with minor modifications. The internal parts spin the opposite direction in the THM425; the helical angle of ...
The processor was designed and manufactured by Motorola. It featured an 8-bit data length, a 10-bit instruction length and a 13-bit address length. The address space was "paged", meaning you could not directly address all of the address space without special instructions. There were 4 pages. Page 0 was for normal (background) code.