Ads
related to: what do structural welders weld to look good for gas
Search results
Results From The WOW.Com Content Network
Uniformity is a quality attribute indicating good workmanship. Trained welders are taught to keep the bead the same size at the beginning of the weld as at the end. If the bead gets too wide, the welder increases the speed of welding travel. If the bead gets too narrow or if the weld puddle is lost, the welder slows down the speed of travel.
This is known informally as "dual shield" welding. This type of FCAW was developed primarily for welding structural steels. In fact, since it uses both a flux-cored electrode and an external shielding gas, one might say that it is a combination of gas metal and FCAW. The most often used shielding gases are either straight carbon dioxide or ...
Most weld purging is carried out on joints made by the TIG or GTAW arc welding process. [6] When the laser welding process is chosen, joints or welds being made on reactive materials will need to be carried out and in the case of electron beam welding, this is carried out in a vacuum, in which case purging takes place by complete evacuation of all gas.
Chemical welding process, not popular Limited Oxyacetylene welding: 311: OAW Combustion of acetylene with oxygen produces high-temperature flame, inexpensive equipment Maintenance, repair Oxygen/Propane welding 312: Gas welding with oxygen/propane flame Oxyhydrogen welding: 313: OHW Combustion of hydrogen with oxygen produces flame Limited
Improper choice of a welding gas can lead to a porous and weak weld, or to excessive spatter; the latter, while not affecting the weld itself, causes loss of productivity due to the labor needed to remove the scattered drops. If used carelessly, shielding gasses can displace oxygen, causing hypoxia and potentially death. [1] [2]
A WPS is supported by a Procedure Qualification Record (PQR or WPQR), a formal record of a test weld performed and rigorously tested to ensure that the procedure will produce a good weld. Individual welders are certified with a qualification test documented in a Welder Qualification Test Record (WQTR) that shows they have the understanding and ...
Gas metal arc welding (GMAW), also known as metal inert gas or MIG welding, is a semi-automatic or automatic process that uses a continuous wire feed as an electrode and an inert or semi-inert gas mixture to protect the weld from contamination. Since the electrode is continuous, welding speeds are greater for GMAW than for SMAW.
The gas nozzle directs the shielding gas evenly into the welding zone. Inconsistent flow may not adequately protect the weld area. Larger nozzles provide greater shielding gas flow, which is useful for high current welding operations that develop a larger molten weld pool. A gas hose from the tanks of shielding gas supplies the gas to the nozzle.