When.com Web Search

  1. Ads

    related to: 3 4 inch pressure regulator

Search results

  1. Results From The WOW.Com Content Network
  2. Pressure regulator - Wikipedia

    en.wikipedia.org/wiki/Pressure_regulator

    A typical nominal regulated gauge pressure from a medical oxygen regulator is 3.4 bars (50 psi), for an absolute pressure of approximately 4.4 bar and a pressure ratio of about 4.4 without back pressure, so they will have choked flow in the metering orifices for a downstream (outlet) pressure of up to about 2.3 bar absolute.

  3. List of pipeline accidents in the United States in the 1980s

    en.wikipedia.org/wiki/List_of_pipeline_accidents...

    January 28 – In Centralia, Missouri, natural gas at 47 psig entered a low pressure distribution system which normally operated at 0.40 psig after a backhoe bucket snagged, ruptured, and separated a 3/4-inch steel pressure regulator control line at a regulator station. The backhoe, owned and operated by the city of Centralia, was being used to ...

  4. Oxy-fuel welding and cutting - Wikipedia

    en.wikipedia.org/wiki/Oxy-fuel_welding_and_cutting

    The regulator ensures that pressure of the gas from the tanks matches the required pressure in the hose. The flow rate is then adjusted by the operator using needle valves on the torch. Accurate flow control with a needle valve relies on a constant inlet pressure. Most regulators have two stages.

  5. Gas cylinder - Wikipedia

    en.wikipedia.org/wiki/Gas_cylinder

    The regulator is adjusted to control the downstream pressure, which will limit the maximum flow of gas out of the cylinder at the pressure shown by the downstream gauge. For some purposes, such as shielding gas for arc welding, the regulator will also have a flowmeter on the downstream side.

  6. List of pipeline accidents in the United States (1950–1969)

    en.wikipedia.org/wiki/List_of_pipeline_accidents...

    January 30 – A 4 inch gas main that was leaking triggered an explosion that killed 7, injured 17, and destroyed nearby building, in Pittsburgh, Pennsylvania. Gas company workers had been removing sidewalk to find the leak before the explosion. [173] March 15 – A 30-inch high-pressure transmission line, near Edna, Texas, ruptured and caught ...

  7. Scuba cylinder valve - Wikipedia

    en.wikipedia.org/wiki/Scuba_cylinder_valve

    The original design 200 bar regulator fitting with five threads will not seal in a 300 bar valve, preventing potential overload, particularly of the high pressure hose and submersible pressure gauge, but the DIN 300 bar regulator inlet fitting with seven threads available on almost all recent regulators is compatible with 200 and 232 bar valves ...

  1. Ads

    related to: 3 4 inch pressure regulator