Search results
Results From The WOW.Com Content Network
Wireless tools for Linux is a collection of user-space utilities written for Linux kernel-based operating systems to support and facilitate the configuration of device drivers of wireless network interface controllers and some related aspects of networking using the Linux Wireless Extension.
Linux-based router project supporting a large set of layer-1 technologies (e.g. Ethernet LAN, Wireless LAN, ISDN, DSL, UMTS), layer-3 protocols and functionality (IPv4, IPv6, stateful packet filter), and various network-related functionality (e.g. Bridging, Bonding, VLANs; DNS, DHCPv4, DHCPv6, IPv6 RA; PPP (client+server), PPTP (client+server ...
On some systems, the protocol name may be followed by "4" or "6", depending on whether the protocol is running over IPv4 or IPv6. Local Address – The IP address of the local computer and the port number being used. The name of the local computer that corresponds to the IP address and the name of the port is shown unless the -n parameter is ...
netsh, among many other things, also allows the user to change the IP address on their machine. Starting from Windows Vista , one can also edit wireless settings (for example, SSID ) using netsh . netsh can also be used to read information from the IPv6 stack.
The Internet Engineering Task Force (IETF) has reserved the IPv4 address block 169.254.0.0 / 16 (169.254.0.0 – 169.254.255.255) for link-local addressing. [1] The entire range may be used for this purpose, except for the first 256 and last 256 addresses (169.254.0.0 / 24 and 169.254.255.0 / 24), which are reserved for future use and must not be selected by a host using this dynamic ...
COMMAND: The command to run (add, delete, change, get, monitor, flush)-net: <dest> is a network address-host: <dest> is host name or address (default)-netmask: the mask of the route <dest>: IP address or host name of the destination <gateway>: IP address or host name of the next-hop router
The Address Resolution Protocol (ARP) is a communication protocol for discovering the link layer address, such as a MAC address, associated with a internet layer address, typically an IPv4 address. The protocol, part of the Internet protocol suite , was defined in 1982 by RFC 826 , which is Internet Standard STD 37.
In order to connect to a computer running TCP/IP via its NetBIOS name, the name must be resolved to a network address. Today this is usually an IP address (the NetBIOS name to IP address resolution is often done by either broadcasts or a WINS Server – NetBIOS Name Server). A computer's NetBIOS name is often the same as that computer's host ...