Search results
Results From The WOW.Com Content Network
The metric codes still represent the dimensions in mm, even though the imperial size codes are no longer aligned. Problematically, some manufacturers are developing metric 0201 components with dimensions of 0.25 mm × 0.125 mm (0.0098 in × 0.0049 in), [ 31 ] but the imperial 01005 name is already being used for the 0.4 mm × 0.2 mm (0.0157 in ...
The light from white LED lamps and LED strip lights is usually provided by industry standard surface-mounted device LEDs (SMD LEDs). [2] Non-SMD types of LED lighting also exist, such as COB (chip on board) and MCOB (multi-COB). Surface-mounted device LED modules are described by the dimensions of the LED package. A single multicolor module may ...
Metal electrode leadless face (MELF) is a type of leadless cylindrical electronic surface mount device package with metal end terminals. Diodes and resistors are the most common MELF devices. [1] The EN 140401-803 and JEDEC DO-213 standards describe multiple MELF components. [2]
The reference designator usually consists of one or two letters followed by a number, e.g. C3, D1, R4, U15. The number is sometimes followed by a letter, indicating that components are grouped or matched with each other, e.g. R17A, R17B. The IEEE 315 standard contains a list of Class Designation Letters to use for electrical and electronic ...
Surface-mount technology was developed in the 1960s. By 1986, surface-mounted components accounted for 10% of the market at most but were rapidly gaining popularity. [4] By the late 1990s, the great majority of high-tech electronic printed circuit assemblies were dominated by surface mount devices.
Overdriving an LED in high ambient temperatures may result in overheating the LED package, eventually leading to device failure. An adequate heat sink is needed to maintain long life. This is especially important in automotive, medical, and military uses where devices must operate over a wide range of temperatures, and require low failure rates.
IEC 62090 Product package labels for electronic components using bar code and two-dimensional symbologies; IEC 62091 Low-voltage switchgear and control gear – Controllers for drivers of stationary fire pumps; IEC 62093 Balance-of-system components for photovoltaic systems – Design qualification natural environments
Briefly speaking, the LED die is assembled face down on the sub-mount, which is usually silicon or ceramic, acting as the heat spreader and supporting substrate. The flip-chip joint can be eutectic, high-lead, lead-free solder or gold stub. The primary source of light comes from the back side of the LED chip, and there is usually a built-in ...