Ads
related to: narrow sides of woodthertastore.com has been visited by 100K+ users in the past month
Search results
Results From The WOW.Com Content Network
The dice had two narrow sides and two broad sides, with one of the narrow sides being flat, the other concave, while one broad side was concave and the other convex. [8] The sides were marked with the values 1,3,4 and 6, with opposing sides adding up to seven.
The tendency for wood that is being cut to direct the saw parallel to its grain. lath. Also called a slat. A thin, narrow strip of straight-grained wood, typically arranged side-by-side with others and used to support roof shingles or tiles, as a backing material for plaster or stucco in walls and ceilings, or in lattice and trellis frameworks ...
Wooden barrels made of multiple staves. A wood stave pipeline for a hydropower application. Wood stave pipeline part of the Yakima Project. A stave is a narrow length of wood with a slightly bevelled edge to form the sides of barrels, tanks, tubs, vats and pipelines, originally handmade by coopers. [1]
"When the rings are wide, the transition from spring wood to summer wood is gradual, while in the narrow rings the spring wood passes into summer wood abruptly. The width of the spring wood changes but little with the width of the annual ring, so that the narrowing or broadening of the annual ring is always at the expense of the summer wood.
Roof laths span across between the rafters and support the wood shingles. A lath or slat is a thin, narrow strip of straight-grained wood used under roof shingles or tiles, on lath and plaster walls and ceilings to hold plaster, and in lattice and trellis work. [1] Lath has expanded to mean any type of backing material for plaster.
The bottom of the punt is made with long, narrow planks stretching fore and aft, attached to the flat sides and the treads. To allow the wood to swell when it gets wet, the planks are set a small distance apart (traditionally the width of an old penny, about 1–2 mm).