Search results
Results From The WOW.Com Content Network
Switched fabric or switching fabric is a network topology in which network nodes interconnect via one or more network switches [1] (particularly crossbar switches).Because a switched fabric network spreads network traffic across multiple physical links, it yields higher total throughput than broadcast networks, such as the early 10BASE5 version of Ethernet and most wireless networks such as Wi-Fi.
The link-state protocol is performed by every switching node in the network (i.e., nodes which are prepared to forward packets; in the Internet, these are called routers). [3] The basic concept of link-state routing is that every node constructs a map of the connectivity to the network in the form of a graph , showing which nodes are connected ...
In a single-chassis system, the three switching stages—S1, S2, and S3—are all contained on one fabric card. In a multi-chassis system, the S2 stage is contained within the Fabric Card Chassis, with the S1 and S3 stages resident in the Line Card Chassis. The CRS Line card chassis comes in three different flavors: 4-slot, 8-slot and 16-slot.
A routing protocol specifies how routers communicate with each other to distribute information that enables them to select paths between nodes on a computer network. Routers perform the traffic directing functions on the Internet; data packets are forwarded through the networks of the internet from router to router until they reach their ...
The router which first prefixes the MPLS header to a packet is an ingress router. The last router in an LSP, which pops the label from the packet, is called an egress router. Routers in between, which need only swap labels, are called transit routers or label switch routers (LSRs).
The destination PE router then decapsulates the traffic and forwards it to the CE router at the destination. The backbone network is completely transparent to the customer equipment, allowing multiple customers or user communities to use the common backbone network while maintaining end-to-end traffic separation.
In cases where secondary/standby routers all have the same priority, the secondary/standby router with the highest IP address becomes the primary/active router. All physical routers acting as a virtual router must be in the same local area network (LAN) segment. Communication within the virtual router takes place periodically.
While the term "fabric" has also been used in association with storage area networks and with switched fabric networking, the introduction of compute resources provides a complete "unified" computing system. [citation needed] Other terms used to describe such fabrics include "unified fabric", [4] "data center fabric" and "unified data center ...