Search results
Results From The WOW.Com Content Network
The crankshaft drives the camshaft (via a timing belt, timing chain or gears), which in turn actuates the intake and exhaust valves. [1] These valves allow the engine to inhale air (or an air/fuel mixture) and exhale the exhaust gasses. [2] The most common devices to transfer the drive are toothed rubber belts, metal timing chains or a set of ...
Early production 2.0 L engines used a hydraulic tensioner to tension the timing belt. 2000 and 2001 engines used a mechanical spring-loaded tensioner that tended to wear out prematurely, causing serious valve and piston damage upon belt failure due to the interference design of the engine. 2002 and up engines utilized a different mechanical ...
The Ford Duratorq engine, commonly referred to as Duratorq, is the marketing name of a range of Ford diesel engines introduced in 2000. The larger capacity 5-cylinder units use the Power Stroke branding when installed in North American-market vehicles.
The large-journal connecting rods were thicker (heavier) and used 3 ⁄ 8 in (9.5 mm) diameter cap-bolts to replace the small-journal's 11/32. 1968 blocks were made in 2-bolt and 4-bolt versions with the 4-bolt center-three main caps each fastened by two additional bolts which were supported by the addition of thicker crankcase main-web bulkheads.
The LD9 Twin Cam was a 2.4-liter Quad 4 variant which debuted in 1996 with balance shafts and a redesigned cylinder head. In the mid-1990s, these engines, like their earlier 2.3-liter counterparts, were known for timing chain failures, as well as water pump failures, in which the water pumps were often difficult and costly to access and replace.
The 4D5 engine is a range of four-cylinder belt-driven overhead camshaft diesel engines which were part of the "Astron" family, and introduced in 1980 in the then new fifth generation Galant. As the first turbodiesel to be offered in a Japanese passenger car, it proved popular in the emerging SUV and minivan markets where Mitsubishi was highly ...
The FB is built at Gunma Oizumi Plant and was initially available as a 2.5 litre displacement engine, starting in Forester models, with a 2.0 litre model to follow in Imprezas. [ 1 ] [ 4 ] 0W–20 oil is used to help fuel economy, and approximately 1 litre more oil is used as the newly adopted timing chain requires an oil supply.
The B5254S, [103] sometimes referred to as B5254S LH 3.2 or B5254S M4.4, is a 2.4 L (2,435 cc) straight-five. It is naturally aspirated with a power output of 170 PS (125 kW; 168 hp) at 6100 rpm with 220 N⋅m (162 lb⋅ft) of torque at 4700 rpm.