Search results
Results From The WOW.Com Content Network
Cartridge adapters have also been made to use .38 caliber handgun cartridges with bullet diameters of approximately .357-inch (9.1 mm) in .35 caliber rifles designed for bullets of .358-inch (9.1 mm) diameter. [3] Supplemental chambers in .22 caliber, and potentially .17 caliber as well, pose a special problem not shared by larger calibers.
Since a straight-walled rimless cartridge is designed to headspace off of the case mouth, this prevents the ammunition loader or manufacturer from using a heavy crimp, which is a ring pinched or "crimped" into the cartridge case, designed to lock the bullet securely in place until fired.
Some cartridges, like the .470 Capstick, have what is known as a "ghost shoulder" which has a very slightly protruding shoulder, and can be viewed as a something between a bottleneck and straight-walled case. A ghost shoulder, rather than a continuous taper on the case wall, helps the cartridge to line up concentrically with the bore axis ...
Headspace positioning of rimless, rimmed, belted and straight cartridges Several different rimmed, .22 rimfire cartridges, which have a uniform forward diameter, and which have headspace on the rim, allowing any length of cartridge shorter than the maximum size to be used in the same firearm Firearms chambered for tapered rimmed cartridges like this .303 British cannot safely fire shorter ...
Introduced by Remington at the 2023 SHOT Show. Straight-walled cartridge based on a blown-out .30-30 Winchester case and designed for deer hunting in U.S. states that require hunters with modern rifles to use that cartridge shape. [56].376 Steyr: 1999 [3] Austria & US 2 [59] R 9.5×60mm 2754 4211 0.375 60mm
Although originating from an identical preceding series of experimental cartridges, the commercial 1952 .308 Winchester and the military 1954 7.62×51mm NATO chamberings have evolved separately but remain similar enough that they can be loaded into rifles chambered for the other round, but the .308 Winchester cartridges are typically loaded to ...
45 Raptor : uses the standard 7.62 NATO case, cut to a length of 1.800" from 2.015", resulting in a straight-wall cartridge, neck is sized to 0.452". The resulting COAL of 2.300" is only 1.02 mm longer than the maximum COAL for chambering a cartridge in the smaller AR-15; however, the 45 Raptor chamber pressure is allowed to be as high as ...
Although not originally designed for handguns, several rifle and shotgun cartridges have also been chambered in a number of large handguns, primarily in revolvers like the Phelps Heritage revolver, Century Arms revolver, Thompson/Centre Contender break-open pistol, Magnum Research BFR, and the Pfeifer Zeliska revolvers.