Search results
Results From The WOW.Com Content Network
Thus the optimum rate of twist for this bullet should be approximately 12 inches per turn. The typical twist of .30-06 caliber rifle barrels is 10 inches per turn, accommodating heavier bullets than in this example. A different twist rate often helps explain why some bullets work better in certain rifles when fired under similar conditions.
Civilian AR-15 rifles are commonly found with 1 in 12 inches (30 cm) or 54.8 calibers for older rifles and 1 in 9 inches (23 cm) or 41.1 calibers for most newer rifles, although some are made with 1 in 7 inches (18 cm) or 32 calibers twist rates, the same as used for the M16 rifle. Rifles, which generally fire longer, smaller diameter bullets ...
The common rifling twist rate for this cartridge is 305 mm (1 in 12 in), 4 grooves, Ø lands = 7.62 mm, ... (1 in 10 in) twist rate is also commonly applied.
The 7.92×33mm Kurz has a 2.22 ml (34.3 grain H 2 O) cartridge case capacity.. 7.92×33mm Kurz maximum C.I.P. cartridge dimensions.All sizes in millimeters (mm). Americans define the shoulder angle at alpha/2 ≈ 17.5 degrees. The common rifling twist rate for this cartridge is 240 mm (1 in 9.45 in), four grooves, Ø lands = 7.89 millimetres (0.311 in), Ø grooves = 8.20 millimetres (0.323 in ...
The 7×64mm offers very good penetrating ability due to a fast twist rate that enables it to fire long, heavy bullets with a high sectional density. The 7×64mm's rimmed sister cartridge, the 7×65mmR, is also very popular in Central Europe for the same reasons as the 7×64mm.
Common rifling twist rates also often have to be tightened to stabilize very long projectiles. Such commercially nonexistent cartridges are termed "wildcats". The use of a wildcat-based (ultra) long-range cartridge demands the use of a custom or customized rifle with an appropriately cut chamber and a fast-twist bore.
The common rifling twist rate for this cartridge is 280 mm (1 in 11.02 in); although 250 mm (1 in 9.84 in) was also used, see below, 4 grooves, ...
The fact that the .243 Win was originally offered in a 1 in 10 inch rifling twist rate, a rate better able to stabilize heavier, 100- and 105-grain bullets, versus the .244 Remington's 1 in 12 inch twist (hence the 90-grain factory offering) was also a factor in their popularity.