Search results
Results From The WOW.Com Content Network
Dubbed EcoTec3, the 4.3 L (260 cu in) is a Generation V small block V6 truck engine. It gets its displacement from bore and stroke of 99.6 mm × 92 mm (3.921 in × 3.622 in) with a compression ratio of 11.0 to 1. Firing order is 1-6-5-4-3-2. [82] This engine replaces the unrelated 4.3L V6 whose lineage dates back to 1978.
For this inline-4 engine, 1-3-4-2 could be a valid firing order. The firing order of an internal combustion engine is the sequence of ignition for the cylinders. In a spark ignition (e.g. gasoline/petrol) engine, the firing order corresponds to the order in which the spark plugs are operated. In a diesel engine, the firing order corresponds to ...
The GMC straight-6 engine was a series of gasoline-powered straight-six engines introduced in the 1939 model year by the GMC Trucks division of General Motors. Prior to the introduction of this new engine design GMC trucks had been powered by straight-six engines designed by the Buick , Pontiac and Oldsmobile divisions of GM.
A 400 cu in (6.6 L) small-block V8 in a 1975 Avanti II The 400.92 cu in (6,570 cc) 400 is the only engine in this family; it was introduced in 1970 and produced for ten years. It has a 4.125-inch (104.8 mm) bore and a 3.750-inch (95.25 mm) stroke.
Typical firing order of 1-5-3-6-2-4 3890-litre MAN B&W 6S60MC marine diesel engine If an appropriate firing order is used, a straight-six engine has perfect primary and secondary engine balance . The primary balance is due to the front and rear trio of cylinders moving in pairs (albeit 360° out of phase), thus canceling out the rocking motion ...
Firing order is 1-5-3-6-2-4. Amount of coolant in the radiator was 11 litres (2.9 US gal; 2.4 imp gal) from 1972 and 12 litres (3.2 US gal; 2.6 imp gal) from 1980s and on. Amount of oil (lubricant) in engine was 6 litres (1.6 US gal; 1.3 imp gal). Lubrication system was pressure circulation lubrication system.
Also called the GM small corporate pattern and the S10 pattern. This pattern has a distinctive odd-sided hexagonal shape. Rear wheel drive applications have the starter mounted on the right side of the block (when viewed from the flywheel) and on the opposite side of the block compared to front wheel drive installations.
The Holden straight-six motor is a series of straight-six engines that were produced by General Motors Holden at their Port Melbourne plant between 1948 and 1986. The initial Grey motor was so dubbed because of the colour of the cylinder block, later motors came in the form of a Red, Blue, Black, and the four-cylinder Starfire engine.