Ads
related to: aluminum extrusion guidelines
Search results
Results From The WOW.Com Content Network
DFM guidelines define a set of rules for a person designing a product to ease the manufacturing process, reduce cost and time. For example, if a hole is to be drilled , if the designer specifies a standard hole size then it reduces the cost because the drill bits of unusual sizes are not readily available they have to be custom made.
Extrusion is a plastic deformation process in which raw material (billet) is forced to flow by compression through the die opening of a smaller cross-section area. The extrusion process is divided in two basic types: direct extrusion and indirect extrusion.
Examples of T-slotted profiles 1964 patent demonstrating early use of extruded T-slot members. Cross-section of 80/20 T-slotted profiles, 10 and 15 series A bicycle trailer for bike-trekking with three Euroboxes and aluminium profile framing
A horizontal hydraulic press for hot aluminum extrusion (loose dies and scrap visible in foreground) There are many different variations of extrusion equipment. They vary by four major characteristics: [1] Movement of the extrusion with relation to the ram. If the die is held stationary and the ram moves towards it then it is called "direct ...
In 2000, Light Metal Age was named the official publication of the Seventh International Aluminum Extrusion Technology Seminar (ET 2000), and was again named the official publication for the subsequent seminars, ET ’04 and ET ’08. [2] Roy Fellom, Jr. died in 1993. Light Metal Age is carried on by his daughter, Ann Marie Fellom.
T1 temper 6063 has an ultimate tensile strength of at least 120 MPa (17,000 psi) in thicknesses up to 12.7 mm (0.5 in), and 110 MPa (16,000 psi) from 13 to 25 mm (0.5 to 1 in) thick, and yield strength of at least 62 MPa (9,000 psi) in thickness up to 13 millimetres (0.5 in) and 55 MPa (8,000 psi) from 13 mm (0.5 in) thick.
Ad
related to: aluminum extrusion guidelines