Ads
related to: tyre size by number plate
Search results
Results From The WOW.Com Content Network
If a tire size has three sets of numbers (15x6.00-6, 26x12.00-12, 31x15.50-15), then the first number (26x12.00-12) is the approximate tire diameter in inches, the second number (26x12.00-12) is the approximate width in inches, and the third number (26x12.00-12) is the rim diameter in inches.
A typical example of a tire marking according to ISO 5775-1 is: 32-597 inflate to 400 kPa. The first number (nominal section width) is essentially the width of the inflated tire (minus any tread). The second number (nominal rim diameter) is the inner diameter of the tire when it is mounted on the rim.
Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.
The word tire is a short form of attire, from the idea that a wheel with a tire is a dressed wheel. [3] [4] Tyre is the oldest spelling, [5] and both tyre and tire were used during the 15th and 16th centuries. During the 17th and 18th centuries, tire became more common in print.
The number following the "plus" describes the number of inches which is added to the diameter of the rim. For example, plus one sizing means increasing the wheel by 1 inch (25 mm) – i.e. from a 15 to 16 in (380 to 410 mm) rim size. A "plus zero" upgrade means changing to a wider tire size while using the same diameter wheel.
ETRTO sizes apply to rims and tyres for vehicles of all types, including bicycles. The great advantage of ETRTO sizing is that it is unambiguous; previously, nominal dimensions were used which were interpreted in different ways by different countries and manufacturers - a problem for the end user.