Ads
related to: headlight bulb application guide replacement parts chartyourmechanic.com has been visited by 10K+ users in the past month
Search results
Results From The WOW.Com Content Network
UN Regulation 37 covers motor vehicle filament lamps. These are categorized in three groups: those without general restriction that can be used in any application, those acceptable only for signalling lights (not for road illumination lamps), and those no longer allowable as light sources for new type approvals but still permitted for production as replacement parts.
Under ECE regulations, H1 lamps are required to emit white or selective yellow light. [1] U.S. regulations require H1 lamps to emit white light. [2] Under both ECE and U.S. specifications, the allowable range of white light is quite large; some H1 lamps have a slight blue or yellow tint to the glass yet still produce light legally acceptable under the requirement for white light.
The incandescent light bulb was for a long time the only light source used in automotive lighting. Incandescent bulbs are still commonly used in turn signals to stop hyper-flashing of the turn signal flashers. Many types of bulbs have been used. Standardized type numbers are used by manufacturers to identify bulbs with the same specifications.
A light source (filament or arc) is placed at or near the focus of a reflector, which may be parabolic or of non-parabolic complex shape. Fresnel and prism optics moulded into the headlamp lens refract (shift) parts of the light laterally and vertically to provide the required light distribution pattern. Most sealed-beam headlamps have lens optics.
Hard glass blocks UV and has been used extensively for the bulbs of car headlights. [24] Alternatively, the halogen lamp can be mounted inside an outer bulb, similar to an ordinary incandescent lamp, which also reduces the risks from the high bulb temperature.
The suffix after the G indicates the pin spread; the G dates to the use of Glass for the original bulbs. GU usually also indicates that the lamp provides a mechanism for physical support by the luminaire: in some cases, each pin has a short section of larger diameter at the end (sometimes described as a "peg" rather than a "pin" [2]); the socket allows the bulb to lock into place by twisting ...