Search results
Results From The WOW.Com Content Network
The engine block had 4.84-inch (123 mm) bore centers, two-bolt main bearing caps, a "side oiling" lubrication system (the main oil gallery located low on the driver's side of the crankcase), with full-flow oil filter, and interchangeable cylinder heads. Heads used on the high performance 409 and 427 engines had larger ports and valves than ...
It was a higher-performance version of the base 350 cu in (5.7 L) V8 with casting number 186, 2.02 / 1.6 in (51.3 / 40.6 mm) valve heads and had an 11.0:1 compression ratio requiring high octane gas. This produced 350 hp (261 kW) (SAE gross power) and 380 lb⋅ft (515 N⋅m) torque. [ 22 ]
The 301.6-cubic-inch (4.9 L) GMC inline six was produced from 1952 to 1960, when it was replaced by the V6. It has a square bore/stroke ratio of 4 by 4 inches (101.6 mm × 101.6 mm). This is the largest raised-deck engine. It was originally designed for the GMC military M135 and M211.
It has four valves per cylinder, utilizes dual-overhead cams design, and features variable valve timing on the exhaust cam, a first for GM inline engines. When introduced, this engine's power was 270 hp (201 kW) at 6,000 rpm and torque was 275 lb⋅ft (373 N⋅m) at 3,600 rpm. 2003 saw a slight bump in power to 275 hp (205 kW), while torque was ...
This newly revised engine put out 65 hp (48 kW), and was produced until 1936, with compression rates between 5.2:1 to 6:1. [3] Toyota's first engine, the Type A, produced from 1935 to 1947, was a reverse engineered copy of the 207 Chevrolet engine, with 62 hp (46 kW) power output and 94 percent of the compression ratio of the Chevrolet original ...
The #1 cylinder is at the right rear with cylinders 1, 3, and 5 on the right, while #2 is the left rear with cylinders 2, 4, and 6 on the left. [2]: 24 The firing order is: 1-4-5-2-3-6. The crankcase is cast as two box-section halves. The assembled crankcase provides for four main bearings. There are four cylinder head studs per cylinder, for a ...
Stamped ball-pivot stud-mounted rocker arms were introduced, similar to the V8, with a 1.75:1 ratio, rather than the earlier shaft-mounted 1.477:1 rockers. The first use of the new engine series was the 194 cu in (3.2 L) Hi-Thrift version in the 1962 Chevy II ; the following year, Chevrolet passenger cars adopted the 230 cu in (3.8 L) version ...
GM claims that the 1.0-liter turbo is 25 percent (3 dBA) quieter than the Ford Fiesta's 1.0-liter turbo, and the 1.4-liter is up to 50 percent (6 dBA) quieter than the VW/Audi 1.4-liter turbo. Other silencing measures include a bed-plate cylinder block that increases stiffness and a stiffened aluminum front cam cover.