Ads
related to: simplify 49 over 112 2 3 9 lab connect patch panel cables 2
Search results
Results From The WOW.Com Content Network
A patch cable, patch cord or patch lead is an electrical or fiber-optic cable used to connect ("patch in") one electronic or optical device to another for signal routing. Devices of different types (e.g., a switch connected to a computer, or a switch to a router ) are connected with patch cords.
Lines patched as data ports into a network switch require simple straight-through patch cables at each end to connect a computer. Voice patches to PBXs in most countries require an adapter at the remote end to translate the configuration on 8P8C modular connectors into the local standard telephone wall socket .
However, switching equipment that can emulate the capabilities of a given patch bay is much more expensive. For example, an S-Video matrix routing switcher with the same capability (8×8) as a 16-point S-Video patch panel (8 patch cables connects 8 inputs and 8 outputs) may cost ten times more, though it would probably have more capabilities.
Because pair 1 is on the center pins (4 and 5) of the 8P8C connector in USOC and both T568A and T568B, a telephone will connect to line 1 of both T568A and T568B as well as all of the above registered jacks, but if a second line is used (3 and 6) is used, it connects to line 2 (pair 2) of USOC and T568A jacks, but to pair 3 of T568B jacks. This ...
The micro ribbon connector, first made by Amphenol, that is used in the RJ21 interface, has also been used to connect Ethernet ports in bulk from a switch with 50-pin ports to a Cat-5 rated patch panel, or between two patch panels. A cable with a 50-pin connector on one end can support six fully wired 8P8C connectors or Ethernet ports on a ...
Networking cable is a piece of networking hardware used to connect one network device to other network devices or to connect two or more computers to share devices such as printers or scanners. Different types of network cables, such as coaxial cable , optical fiber cable , and twisted pair cables, are used depending on the network's topology ...
2.5 mm Japanese Industrial Standard (JIS) LAN, audio systems; for 200 μm fibers, simple field termination possible, mates with ST connectors F-3000 Latch, integral light- and dust-cap — 1.25 mm IEC 61754-20 Fiber To The Home (LC compatible) FC: Ferrule Connector or Fiber Channel [9] Screw M8×0.75 [10] 2.5 mm IEC 61754-13 [8]
Once the appropriate connector has been identified, the termination process can begin. Common termination methods include no-epoxy-no-polish, epoxy and polish and pigtail splicing. [2] Regardless of the method, the beginning steps are the same. First, the sleeve, or secondary coating, must be stripped from the fiber. The primary coating must ...