When.com Web Search

Search results

1. Results From The WOW.Com Content Network

2. Propane, butane, and LPG container valve connections

   en.wikipedia.org/wiki/Propane,_butane,_and_LPG...

   Can refer to several connector standards, colloquially known as ACME, Bayonet, Dish or Euronozzle connectors. [3] DIN 477-1 No. 4: A DIN standard for gas cylinder valves for test pressures up to 300 bar (4,400 psi). EN 15202 [9] A European standard for LPG equipment and accessories, specifying LPG cylinder valve connections. [10] EN 417

3. POL valve - Wikipedia

   en.wikipedia.org/wiki/POL_valve

   POL is the common name for the standard CGA 510 (US Compressed Gas Association connection number). The Thread specification is .885" – 14 NGO – LH – INT, meaning 0.885 in (22.5 mm) diameter thread, 14 threads per inch (1.814 mm pitch), National Gas Outlet form, left-hand internal thread. [3]

4. Autogas - Wikipedia

   en.wikipedia.org/wiki/Autogas

   Gas lines and fittings. Containment hose, liquid hose, copper pipe with flared end plus brass elbows and T fitting. The hose between the filler and tank(s) is called the fill hose or fill line. The hose or pipe between the tank(s) and the converter is called the service line. These both carry liquid under pressure.

5. Oxy-fuel welding and cutting - Wikipedia

   en.wikipedia.org/wiki/Oxy-fuel_welding_and_cutting

   LPG will damage an incompatible hose, including most acetylene hoses. The threaded connectors on the hoses are handed to avoid accidental mis-connection: the thread on the oxygen hose is right-handed (as normal), while the fuel gas hose has a left-handed thread. [6] The left-handed threads also have an identifying groove cut into their nuts.

6. Piping and plumbing fitting - Wikipedia

   en.wikipedia.org/wiki/Piping_and_plumbing_fitting

   Press fittings with appropriate and region-specific certification may be used for gas lines. Stainless steel and carbon steel press fittings can withstand up to 16 bars of pressure. A disadvantage of press fittings is the dead space between the pipe and the fitting, which can possibly rule out use for beverage and food applications.

7. Flare fitting - Wikipedia

   en.wikipedia.org/wiki/Flare_fitting

   Flared fittings are an alternative to solder-type joints that are mechanically separable and doesn’t require an open flame. Copper tube used for propane, liquefied petroleum gas, or natural gas may use flared brass fittings of single 45°-flare type, according to NFPA 54/ANSI. Z223.1 National Fuel Gas Code.