Search results
Results From The WOW.Com Content Network
This chart shows the most common display resolutions, with the color of each resolution type indicating the display ratio (e.g., red indicates a 4:3 ratio). This article lists computer monitor , television, digital film, and other graphics display resolutions that are in common use.
The following is a comparison of high-definition smartphone displays, containing information about their specific screen technology, resolution, size and pixel density. It is divided into three categories, containing smartphones with 720p , 1080p and 1440p displays.
The size of a screen is usually described by the length of its diagonal, which is the distance between opposite corners, typically measured in inches. It is also sometimes called the physical image size to distinguish it from the "logical image size," which describes a screen's display resolution and is measured in pixels. [1] [2]
After having used VGA-based 3∶2 resolutions HVGA (480 × 320) and "Retina" DVGA (960 × 640) for several years in their iPhone and iPod products with a screen diagonal of 9 cm or 3.5 inches, Apple started using more exotic variants when they adopted the 16∶9 aspect ratio to provide a consistent pixel density across screen sizes: first 1136 ...
The term display resolution is usually used to mean pixel dimensions, the maximum number of pixels in each dimension (e.g. 1920 × 1080), which does not tell anything about the pixel density of the display on which the image is actually formed: resolution properly refers to the pixel density, the number of pixels per unit distance or area, not ...
The display aspect ratio (DAR) is calculated from the physical width and height of a display, measured each in inch or cm (Display size). The pixel aspect ratio (PAR) is calculated from the width and height of one pixel. The storage aspect ratio (SAR) is calculated from the numbers of pixels in width and height stated in the display resolution.
Other common display modes also defined as VGA include 320×200 at 256 colours (8 bpp) (standard VGA resolution for DOS games that stems from halving the pixel rate of 640×400, but doubling color depth) and a text mode with 720×400 pixels; these modes run at 70 Hz and use non-square pixels, so 4:3 aspect correction is required for correct ...
The apparent PPI of a monitor depends upon the screen resolution (that is, the number of pixels) and the size of the screen in use; a monitor in 800×600 mode has a lower PPI than does the same monitor in a 1024×768 or 1280×960 mode. The dot pitch of a computer display determines the absolute limit of possible pixel density.