Ads
related to: silicon wafer polishing process steps
Search results
Results From The WOW.Com Content Network
To planarize shallow trenches, a common method should be used such as the combination of resist etching-back (REB) and chemical mechanical polishing (CMP). This process comes in a sequence pattern as follows. First, the isolation trench pattern is transferred to the silicon wafer. Oxide is deposited on the wafer in the shape of trenches.
The RCA clean is a standard set of wafer cleaning steps which need to be performed before high-temperature processing steps (oxidation, diffusion, CVD) of silicon wafers in semiconductor manufacturing. Werner Kern developed the basic procedure in 1965 while working for RCA, the Radio Corporation of America.
Etching is a critically important process module in fabrication, and every wafer undergoes many etching steps before it is complete. For many etch steps, part of the wafer is protected from the etchant by a "masking" material which resists etching. In some cases, the masking material is a photoresist which has been patterned using photolithography.
Wafer backgrinding and polishing [133] (reduces the thickness of the wafer for thin devices like a smartcard or PCMCIA card or wafer bonding and stacking, this can also occur during wafer dicing, in a process known as Dice Before Grind or DBG [134] [135]) Wafer bonding and stacking (for three-dimensional integrated circuits and MEMS)
The procedural steps of the direct bonding process of wafers any surface is divided into wafer preprocessing, pre-bonding at room temperature and; annealing at elevated temperatures. Even though direct bonding as a wafer bonding technique is able to process nearly all materials, silicon is the most established material up to now. Therefore, the ...
The resolution of the circuits increases rapidly with each step in design, as the scale of the circuits at the start of the design process is already being measured in fractions of micrometers. Each step thus increases circuit density for a given area. The silicon wafers start out blank and pure. The circuits are built in layers in clean rooms.
Wafering is the process by which a silicon crystal is made into wafers. This process is usually carried out by a multi-wire saw which cuts multiple wafers from the same crystal at the same time. These wafers are then polished to the desired degree of flatness and thickness.
The key steps of the STI process involve etching a pattern of trenches in the silicon, depositing one or more dielectric materials (such as silicon dioxide) to fill the trenches, and removing the excess dielectric using a technique such as chemical-mechanical planarization. [2]