Ad
related to: 10mm cartridge dimensions
Search results
Results From The WOW.Com Content Network
10mm Auto maximum CIP cartridge dimensions [7] The common rifling twist rate for this cartridge is 406.40 mm (1 in 16 inches), 6 grooves, Ø lands = 9.91 mm ...
This is a list of firearm cartridges which have bullets in the 10 millimetres (0.39 in) to 10.99 millimetres (0.433 in) caliber range. Length refers to the cartridge case length. OAL refers to the overall length of the cartridge. All measurements are in mm (in).
The .40 S&W (10.2×22mm) is a rimless pistol cartridge developed jointly by American firearms manufacturers Smith & Wesson and Winchester in 1990. [3] The .40 S&W was developed as a law enforcement cartridge designed to duplicate performance of the Federal Bureau of Investigation's (FBI) reduced-velocity 10mm Auto cartridge which could be retrofitted into medium-frame (9 mm size) semi ...
The 10mm rim is 0.424" (10.8mm) in diameter, and the SPC rim diameter is 0.422" (10.7mm). The .338 caliber bullets are available in weights between 200gr-250gr. 350 Legend : Proprietary. The head and rim dimensions exactly match the military 5.56x45 case, allowing the use of the standard bolt-face of an AR-15.
A guide to the recoil from the cartridge, and an indicator of bullet penetration potential. The .30-06 Springfield (at 2.064 lbf-s) is considered the upper limit for tolerable recoil for inexperienced rifle shooters. [2] Chg: Propellant charge, in grains; Dia: Bullet diameter, in inches; BC: Ballistic coefficient, G1 model; L: Case length (mm)
Handgun cartridges Cartridge name Bullet diameter Case length Cartridge length Type Source in mm in mm in mm 2.34mm rimfire (for Swiss mini gun) .092 2.3.240 6.1: Rimmed, rimfire
Since there are no C.I.P. or SAAMI limits and data sets for wildcat cartridges, this data is unproven. The Austrian 9×25mm Super Auto G pistol cartridge is probably the closest ballistic twin of the 9×25mm Dillon. These cartridges are both necked-down 9 mm variants of the 10mm Auto cartridge, though they dimensionally vary.
Metric diameters for small arms refer to cartridge dimensions and are expressed with an "×" between the bore diameter and the length of the cartridge case; for example, the 6.5×55mm Swedish cartridge has a bore diameter of 6.5 mm and a case length of 55 mm. [2]