Ads
related to: industrial ro system diagram with permeate pump and water
Search results
Results From The WOW.Com Content Network
The clarified water is then fed through a high-pressure piston pump into a series of RO vessels. 90.00–99.98% of the raw water's total dissolved solids are removed and military standards require that the result have no more than 1000–1500 parts per million by measure of electrical conductivity.
In a seawater RO system operating at a 40% membrane water recovery rate, the ERD supplies 60% of the membrane feed flow. Energy is consumed by the circulation pump, however, because this pump merely circulates and does not pressurize water, its energy consumption is almost negligible: less than 3% of the energy consumed by the high pressure pump.
In order to effectively remove permeate components from the slurry, fresh solvent may be added to the feed to replace the permeate volume, at the same rate as the permeate flow rate, such that the volume in the system remains constant. This is analogous to the washing of filter cake to remove soluble components. [4]
Reverse osmosis (RO) is the finest separation membrane process available, pore sizes range from 0.0001 μm to 0.001 μm. Reverse osmosis is able to retain almost all molecules except for water, and due to the size of the pores, the required osmotic pressure is significantly greater than that for microfiltration.
Reverse osmosis is a common process to purify or desalinate contaminated water by forcing water through a membrane. Water produced by reverse osmosis may be used for a variety of purposes, including desalination , wastewater treatment , concentration of contaminants, and the reclamation of dissolved minerals. [ 1 ]
An additional distinction between the reverse osmosis (RO) and forward osmosis (FO) processes is that the permeate water resulting from an RO process is in most cases fresh water ready for use. In FO, an additional process is required to separate fresh water from a diluted draw solution.